To Next PageTo Next Page
Need help?Do you have a question about the Coolaroo Exterior Blind and is the answer not in the manual?
General| Brand | Coolaroo |
|---|---|
| Model | Exterior Blind |
| Category | Window Blinds |
| Language | English |
Choose the installation location and orient the blind headrail.
Assess window suitability and decide on bracket mounting.
Position the right bracket based on installation type (face, side, top).
Mark, drill, and securely install the right-hand bracket.
Position the blind, mark left bracket, drill, and install ensuring level.
Mount the blind into brackets, ensuring the flat pin is vertical.
Remove the pin from the spring mechanism on the left side.
Detailed steps for adjusting blind tension if required.
Attach base rail arms to the base rail using screws.
Drill and fix base rail arms into the wall or frame.
Procedure for retracting the blind, including tension tips.
Guidelines for cleaning the exterior blind fabric.
Key points for correct blind operation and fabric care.
Warning against over-tensioning the blind mechanism.
