• If the cooling device is connected to a DC outlet: Disconnect the cooling
device or switch it off when you turn off the engine. Otherwise you may
discharge the battery
• The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
• The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device at
the end of its life-cycle to an appropriate recycling center.
• Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for the purpose..
• Do not place the cooling device near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.)
• Ensure at all times that there is a minimum of 50 mm ventilation on all
four sides of the cooling device.
• Keep the ventilation area free of any objects that could restrict the air
flow to the cooling components.
• Do not place the cooling device in closed compartments or areas with
none or minimal air flow.
• Ensure that the ventilation openings are not covered.
• Do not fill the inner container with ice or fluids.
• Never immerse the cooling device in water.
• Protect the cooling device and the cable against heat and moisture.
07
To Next Page
Loading...
Need help?
General