4
FAN CF-2030
The fan is intended for artificial ventilation of the room.
DESCRIPTION
1. Safety Grill
2. Blades
3. Motor Head
4. Base Stand Upper Segment
5. Base Stand Middle Segment
6. Base Stand Bottom Segment
7. Base
8. Base Fastener
9. Counterweight
10. Control panel/remote control
Control panel/remote control (10)
11. Switching on/off
12. Speed (L-M-H)
13. Timer
14. OSC (oscillation)
SAFETY PRECAUTIONS
Before using the fan, read this instruction manual carefully
and keep it for further reference.
• Use the unit for its intended purpose only as specified
in this manual.
• Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
• Before switching the unit on for the first time make sure
that your home mains voltage corresponds to the unit
operating voltage.
• Before using the fan examine the power cord closely
and make sure that it is not damaged. If you find that the
power cord is damaged, do not use the unit.
• Do not use the fan outdoors.
• Place the unit on a flat, dry and steady surface away from
sources of heat or open flame.
• Do not use the unit near containers filled with water,
next to a kitchen sink, in wet basements or near a swim-
ming pool.
• Do not immerse the fan, power cord and power plug into
water or any other liquids.
• Do not touch the unit body and the power plug with wet
hands.
• If the fan falls into water, unplug it before touching it and
only then you may take the fan out of water. Apply to the
nearest authorized service center for testing or repairing
the unit at the contact addresses given in the warranty
certificate and on the website www.coolfort.ru.
• Make sure that the power cord does not contact with hot
surfaces and sharp furniture edges.
• Do not switch the unassembled fan on.
• Do not insert any foreign objects into the openings of
the fan protective grids to avoid injuries or unit damage.
• Do not touch the rotating blades during the fan opera-
tion.
• Do not place the fan near curtains or house plants.
• It is not recommended to stay under the air flow coming
from the fan for a long time (especially for children and
elderly people).
• Never leave the operating unit unattended.
• Unplug the fan before cleaning and when you do not use
the unit or before moving it to a new place.
• When unplugging the fan pull the plug but not the cord.
• Clean the unit regularly.
• Do not leave children unattended to avoid them using
the unit as a toy.
• For children safety reasons do not leave polyethylene
bags used as packaging unattended.
Attention! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
• Do not allow children to touch the unit and the power
cord during the unit operation.
• The unit is not intended to be used by people with physi-
cal, sensory or mental disabilities (including children) or
by persons lacking experience or knowledge if they are
not under supervision of a person who is responsible for
their safety or if they are not instructed by this person on
the usage of the unit.
• Do not use the fan if the blades, the power cord or the
power plug are damaged, if the fan works improperly,
after it was dropped or was damaged in some other way.
• If the power cord is damaged, it should be replaced by
the manufacturer, a maintenance service or similar qual-
ified personnel to avoid danger.
• Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
has fallen, unplug the unit and apply to any authorized
service center at the contact addresses given in the
warranty certificate and on the website www.coolfort.ru.
• Transport the unit in the original package.
• Keep the unit in a dry cool place out of reach of children
and people with disabilities.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AR-
EAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After the unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
Fan assembling
• Unpack the fan and remove any advertising stickers that
can prevent its operation.
• Check the unit for damages, do not use it in case of
damages.
• Insert the counterweight (9) into the base (7) and fix it
with the lock (8) (pic. 1).
• The fan is ready for operation.
USING THE FAN
• Before switching the fan on, make sure that the mains
voltage corresponds to the unit operating voltage.
• You can adjust the motor unit (3) tilt angle. Tilt angle is 24°.
• Insert the power plug into the mains socket.
• Press the on/off button (11) on the control panel (10) or
the remote control (10). The fan will start operating at
medium speed, and the LED indicator will light up next
to this mode on the control panel.
• Select the required blade rotation speed (2) on the con-
trol panel (10) or the remote control (10):
«L» - low blades rotation speed;
«M» - medium blades rotation speed;
«H» - high blades rotation speed.
To Next Page
Loading...
