Need help?Do you have a question about the Coolix MDN1-10DEN3 and is the answer not in the manual?
Controls the power state of the appliance and indicates readiness.
Sets desired relative air humidity in 5% increments (35-80%).
Selects dehumidification modes: Cont., Wet (60-70%), Cozy (50%), Dry (35%).
Enables continuous draining; switches to standard mode when deactivated.
Illuminates when the water container is full, stopping operation.
Shows current room air humidity and selected settings.
Adjusts fan speed for maximum dehumidification or quiet operation.
Manually sets desired relative air humidity from 10% to 80%.
Displays appliance status like ice formation or full water tank.
Instructions for emptying the collected water from the tank.
Guides for connecting a hose for continuous water drainage.
Steps for quick daily cleaning of the appliance and tank.
Steps for thorough weekly cleaning, including the air filter.
Troubleshooting steps for when the appliance fails to operate.
Diagnosing and resolving issues with poor dehumidifying performance.
Identifying causes and solutions for loud operation.
Understanding normal ice formation and automatic defrost function.
Interpreting error codes (E1, E2, P1, P2) displayed by the unit.
General| Model | MDN1-10DEN3 |
|---|---|
| Brand | Coolix |
| Category | Dehumidifier |
| Dehumidification Capacity | 10 liters/day |
| Water Tank Capacity | 2 liters |
| Refrigerant | R134a |
| Operating Temperature Range | 5°C - 35°C |
| Noise Level | 42 dB |
To Next Page
