2 Solar heater operating pressure
Make sure that the solar heater operating pressure must not exceed 1.5bar (21psi). It
is recommended to have a pressure gage installed before the solar heater after the
pump/filter to monitor the water pressure going inside the solar heater.
3) Linking additional solar heaters
Never install additional solar heaters when filtration/pump is under operation. Always
turn off the pump before heater installation or disconnection.
CoolSplash Solar Heater Installation
Before installing CoolSplash Solar Heater, check to make sure all parts are present
in the package.
Primary Component
To Next Page
Loading...