Need help?Do you have a question about the Coolster ATV-3125 Series and is the answer not in the manual?
Warns of severe injury or death from improper ATV use and lack of precautions.
Emphasizes mandatory use of approved helmets and protective gear.
Details conditions to avoid, such as public roads, drugs/alcohol, and passengers.
Advises on proper techniques, avoiding paved surfaces, and reading the manual.
Welcomes the user and explains the manual's role in understanding ATV structure and operation.
Highlights ATV dangers, differences from other vehicles, and potential for accidents.
Outlines essential steps like reading manuals, seeking training, and following rules.
Provides guidance on safe riding in various terrains, turning, climbing, and braking.
Identifies and labels major parts of the ATV with corresponding numbers for reference.
Shows various warning labels on the ATV and their associated meanings.
Presents data on ATV-related deaths, injuries, and hospital treatments.
Explains that ATVs are hazardous and handle differently, requiring precautions.
Recommends reading manuals, following procedures, and taking training courses.
Addresses age limits for operation and the critical need for adult supervision.
Details how to locate and identify the Vehicle Identification Number (VIN).
Explains how to find the engine model and serial number for reference.
Describes the function of the ignition switch and multifunction switches.
Explains how to use the accelerator to start and control the vehicle's movement.
Details the use of the remote control for engine stop and unlock functions.
Lists critical checks for brakes, accelerator, chain, tires, and other components.
Details specific checks for transmission, brake pedal, fuel tank, and battery.
Provides instructions on fuel type, capacity, and warnings about fueling.
Guides on checking oil level, recommended oil types, and capacity.
Details required tire pressure and checks for wear and damage.
Explains the steps for starting a cold engine, including choke and ignition.
Details braking deceleration, parking brake, and emergency braking procedures.
Guides on shifting gears and controlling acceleration for different transmission types.
Provides guidelines for the first 1000 km to ensure proper engine commissioning.
Outlines periodic inspections and lubrication tasks for optimal performance.
Explains how to inspect the spark plug for correct gap, torque, and condition.
Details procedures for adjusting front wheel brakes and driving chain relaxation.
Guides on locating, replacing, and understanding fuse ratings and warnings.
Lists common problems like hard starting or engine not working and their solutions.
Details how to clean the vehicle's exterior, protecting paint and plating.
Warns against using high-pressure water and advises on cleaning hot engines.
Provides methods for maintaining the ATV in good condition during long periods of non-use.
Outlines requirements for securely fixing vehicles during transportation.
Details steps for preparing the ATV after a period of storage.
Guides on disassembling packaging, removing parts, and preparing them for assembly.
Illustrates the step-by-step process for installing various ATV components.
Provides instructions for fixing the headlight mounting bracket and wiring.
Details the emissions warranty terms, coverage, and limitations for the ATV.
Lists key dimensions, wheelbase, seat height, and ground clearance.
Provides details on engine type, displacement, power, and torque.
Lists specifications for lubrication, starting, ignition, transmission, and tires.
Outlines the required maintenance and cleaning schedule for the spark arrestor screen.
Presents the electrical wiring diagram for the full auto engine configuration.
Shows the electrical wiring diagram for the semi-auto engine configuration.
General| Brand | Coolster |
|---|---|
| Model | ATV-3125 Series |
| Category | Offroad Vehicle |
| Language | English |
To Next Page
