CoolStream Duo BTR102 User Manual

Bluetooth Receiver
Model BTR102
Quick Start Guide
Read this instruction manual before operating
the appliance; and save it for further reference.
4
Charging the Battery
After the purchase of your CoolStream Duo it is recommended
to immediately charge the battery for 3 hours.
In order to charge the battery of the CoolStream Duo plug the
CoolStream into either a 30 Pin docking station or a 30 Pin
charging cable. The battery switch can be in either the on or off
position for charging.
The battery of the CoolStream Duo supports continuous
playback for 5 hours.
SPECIFICATIONS
• Bluetooth 3.0 supporting A2DP for stereo sound
• Bluetooth range up to 30 feet
• Rechargeable Lithium battery supports up to 5 hours play time
• 3.5mm Jack supports connection to home and car stereos with
3.5mm line-in jack
• 3.5mm jack supports connection to wired earphones
• Automatic detection of 5V or 12V power supply
If you need further assistance, please contact the Exeter Science &
Entertainment support department for trouble shooting prior return-
ing this device.
E-mail: CoolStream@exeterse.com
Phone: 603 - 421- 6515
Exeter Science & Entertainment warrants this product against defect
in material or workmanship for 1 Year from the date of purchase.
For more information, please visit www.coolstream.co

CoolStream Duo BTR102 Specifications

General

Brand	CoolStream Duo
Model	BTR102
Category	Receiver
Language	English

Summary

Charging the Battery

Charging Procedure

Recommended initial charge for 3 hours. Plug into 30 Pin docking station or charging cable. Battery supports 5 hours playback.

Product Overview

Diagram Top View

Details the On/Off switch and 3.5mm jack. Includes LED color status for charging and pairing.

Battery On/Off Switch

Instructions for sliding the switch to the left for ON or right for OFF to prevent battery drain.

3.5mm Line Out Jack

Connects audio cable to stereos or wired headphones for audio output.

Playing Music

Via 30 Pin Connector

Connects CoolStream Duo to docking station's 30 Pin connector for playback. May not be supported by all stations.

Via 3.5mm Line-in Jack (Docking Station)

Uses a 3.5mm cable to connect CoolStream Duo to docking station's line-in jack.

Via 3.5mm Line-In Jack (Home/Car Stereo)

Connects device to home or car stereo using a 3.5mm cable and the CoolStream Duo's battery.

With Wired Earphones

Transforms wired earphones into Bluetooth earphones by plugging into the 3.5mm jack.

Multipoint Function

Allows pairing and connection with two mobile devices sequentially.