coolwell XPAC-09 CO - User Manual

Questions and Answers

D
daltondavidAug 13, 2025
Why is my coolwell XPAC-09 CO not cold enough?
- M
  millernicoleAug 13, 2025
  Your Coolwell Air Conditioner might not be cooling effectively due to several reasons. Ensure all doors and windows are closed to prevent warm air from entering. Remove any heat sources from the room. Check that the exhaust air hose is properly connected and not blocked; clean it if necessary. Also, verify that the temperature setting isn't too high and that the air inlet is free from obstructions; clean the air inlet if needed.
L
Lucas ClarkAug 17, 2025
Why my coolwell XPAC-09 CO does not turn on?
- C
  cameronlongAug 17, 2025
  Your Coolwell Air Conditioner might not be turning on because the 'water full' indicator light is flashing and the water tray is full, so you should empty the water from the tray. Alternatively, if you are using the heating mode, the ambient temperature could be higher than the set temperature (in which case you should reset the temperature). If you are using the cooling mode, the ambient temperature could be lower than the set temperature (in which case you should reset the temperature).
M
Monica GutierrezAug 21, 2025
What to do if my coolwell Air Conditioner displays E2 code?
- N
  nwaltersAug 21, 2025
  If your Coolwell Air Conditioner is showing an E2 code, this indicates that the water tray is full during cooling. To resolve this, remove the rubber plug and empty the water.
M
Matthew WarrenAug 25, 2025
What to do if my coolwell XPAC-09 CO Air Conditioner displays E4 code?
- C
  Chelsea NguyenAug 25, 2025
  If your Coolwell Air Conditioner displays the E4 code, it means the water tray is full during heating. You should empty the water tray.
M
Matthew LewisAug 28, 2025
How to fix coolwell XPAC-09 CO Air Conditioner if it is too loud?
- S
  santanajohnAug 28, 2025
  If your Coolwell Air Conditioner is making excessive noise, first ensure it's placed on a level and flat surface. If the noise sounds like it's coming from the flow of refrigerant, this is normal.
L
Lisa ClarkSep 1, 2025
What to do if my coolwell XPAC-09 CO displays E0 code?
- D
  drewnicholsSep 1, 2025
  If your Coolwell Air Conditioner is displaying an E0 code, it indicates a failure with the room temperature sensor. Replace the room temperature sensor. Note that the unit can still function without replacing it.
T
Thomas HicksSep 4, 2025
What to do if my coolwell XPAC-09 CO Air Conditioner displays E1 code?
- C
  Crystal RiveraSep 4, 2025
  If your Coolwell Air Conditioner shows an E1 code, this indicates a failure in the condenser temperature sensor. Replace the condenser temperature sensor.
M
Michael CollinsSep 8, 2025
What to do if my coolwell XPAC-09 CO Air Conditioner displays E3 code?
- W
  walterstammySep 8, 2025
  If your Coolwell Air Conditioner is displaying an E3 code, it means that there is a failure in the evaporator temperature sensor. Replace the evaporator temperature sensor.

Summary

Safety Awareness

General Warnings and Precautions

Important warnings for safe operation, installation, and storage of the air conditioner.

R290 Refrigerant Specific Warnings

Essential safety information concerning the R290 refrigerant gas used in the appliance.

General Safety Instructions

Key instructions for safe operation, including placement, handling, and electrical safety.

Electrical Safety and Recycling

Guidelines on electrical socket requirements, fuse details, and responsible product recycling.

Service and Handling Precautions

Precautions for servicing, power cord handling, national gas regulations, and ventilation.

Refrigerant Circuit Handling

Procedures and safety measures for working with the refrigerant circuit and flammable refrigerants.

Operational Safety and Notes

Important notes on operating the unit safely, unplugging, and general operational warnings.

General Instructions for Appliance Repair

Area Preparation for Repairs

Steps for preparing the work area, ensuring ventilation, and controlling flammable materials during repairs.

Work Procedures and Ignition Control

Guidelines for work procedures, leak detection, fire extinguisher readiness, and avoiding ignition sources.

Equipment and Electrical Checks

Procedures for checking refrigeration equipment, electrical devices, and ensuring safety continuity.

Refrigerant System Repair Procedures

Repairs to Sealed Components

Detailed procedures for safely performing repairs on sealed components of the appliance.

Repair of Intrinsically Safe Components

Specific instructions for working on intrinsically safe components in flammable atmospheres.

Cabling Integrity Checks

How to inspect cabling for wear, corrosion, and other environmental effects.

Refrigerant Handling and Charging

Flammable Refrigerant Detection

Methods and precautions for detecting flammable refrigerants and potential leaks.

Leak Detection Methods

Acceptable methods for detecting refrigerant leaks using electronic detectors and fluids.

Refrigerant Removal and Evacuation

Step-by-step process for safely removing and evacuating refrigerant from the system.

Refrigerant Charging Procedures

Requirements and precautions for charging the system with refrigerant, ensuring correct procedures.

Decommissioning and Recovery

Decommissioning Procedures

Comprehensive steps for safely decommissioning the appliance and recovering refrigerant.

Equipment Labelling Requirements

Guidelines for labelling equipment after decommissioning and indicating flammable refrigerant content.

Refrigerant Recovery Process

Recommended practices for safely recovering refrigerant, including equipment and cylinder usage.

Service Personnel Qualifications

Service Personnel Competence and Training

Information on required training and competence for personnel handling flammable refrigerants.

Maintenance and Repair Procedures

Specific procedures for maintenance and repair of portable equipment with flammable refrigerants.

Disposal and Transportation

Disposal of Equipment

Procedures and considerations for the safe disposal of equipment containing flammable refrigerants.

Transport, Marking, and Storage

Regulations and guidelines for transporting, marking, and storing units with flammable refrigerants.

Name of Parts

Component Identification

Visual guide and list identifying the main parts and components of the air conditioner.

Accessories

Included Accessories List

Details the list of accessories provided with the air conditioner and their quantities.

Control Panel Overview

Control Panel Layout and Functions

Explanation of the buttons and indicators on the air conditioner's control panel.

Remote Control Overview

Remote Control Buttons and Functions

Description of the buttons and their functions on the remote control unit.

Operation Introduction

Initial Setup and Power On

Steps for finding a suitable location, installing the exhaust hose, and powering on the unit.

Operation Modes

Operating Conditions and Cautions

Information on operational temperature limits and important cautions for cooling and dehumidifying.

Cooling Operation

Instructions for operating the air conditioner in cooling mode, including temperature and fan speed settings.

Dehumidifying Operation

Guidance on using the dehumidifying mode, including automatic settings for temperature and fan speed.

Fan Operation

Steps for operating the air conditioner solely in fan mode, including fan speed selection.

Heating Operation

Instructions for operating the air conditioner in heating mode, including temperature and fan speed settings.

Timer Operation

How to set the timer for both turning the unit on and off.

Installation Explanations

General Installation Requirements

Basic requirements for installing the air conditioner, including placement and electrical safety.

Water Drainage Procedures

Explanation of the water full alarm and how to drain the unit.

Exhaust Hose Installation

Detailed steps for correctly installing the exhaust hose for proper unit function.

Window Kit Installation

Instructions on how to install the window kit for venting the exhaust hose.

Maintenance Explanations

Water Full Alarm Function

Explanation of the water full alarm and how to drain the unit.

General Maintenance Declarations

Declarations regarding cleaning, chemical usage, and contacting service for repairs.

Air Filter and Surface Cleaning

Air Filter Maintenance

Instructions for cleaning and maintaining the air filter to ensure optimal performance.

Cleaning the Air-conditioner Surface

Guidelines for cleaning the exterior surface of the air conditioner.

Troubleshooting

Unit Not Starting

Steps to resolve issues when the unit does not start after pressing the power button.

Cooling and Noise Issues

Solutions for problems related to insufficient cooling or unusual noise from the unit.

Error Codes and Solutions

Explanation of error codes and suggested remedies for diagnosing and fixing unit malfunctions.

coolwell XPAC-09 CO Specifications

General

Brand	coolwell
Model	XPAC-09 CO
Category	Air Conditioner
Language	English

coolwell XPAC-09 CO - User Manual

Table of Contents

Questions and Answers

Summary

Safety Awareness

General Warnings and Precautions

R290 Refrigerant Specific Warnings

General Safety Instructions

Electrical Safety and Recycling

Service and Handling Precautions

Refrigerant Circuit Handling

Operational Safety and Notes

General Instructions for Appliance Repair

Area Preparation for Repairs

Work Procedures and Ignition Control

Equipment and Electrical Checks

Refrigerant System Repair Procedures

Repairs to Sealed Components

Repair of Intrinsically Safe Components

Cabling Integrity Checks

Refrigerant Handling and Charging

Flammable Refrigerant Detection

Leak Detection Methods

Refrigerant Removal and Evacuation

Refrigerant Charging Procedures

Decommissioning and Recovery

Decommissioning Procedures

Equipment Labelling Requirements

Refrigerant Recovery Process

Service Personnel Qualifications

Service Personnel Competence and Training

Maintenance and Repair Procedures

Maintenance and Repair Procedures

Disposal and Transportation

Disposal of Equipment

Transport, Marking, and Storage

Name of Parts

Component Identification

Accessories

Included Accessories List

Control Panel Overview

Control Panel Layout and Functions

Remote Control Overview

Remote Control Buttons and Functions

Operation Introduction

Initial Setup and Power On

Operation Modes

Operating Conditions and Cautions

Cooling Operation

Dehumidifying Operation

Fan Operation

Heating Operation

Timer Operation

Installation Explanations

General Installation Requirements

Water Drainage Procedures

Exhaust Hose Installation

Exhaust Hose Installation

Window Kit Installation

Window Kit Installation

Maintenance Explanations

Water Full Alarm Function

General Maintenance Declarations

Air Filter and Surface Cleaning

Air Filter Maintenance

Cleaning the Air-conditioner Surface

Troubleshooting

Unit Not Starting

Cooling and Noise Issues

Error Codes and Solutions

coolwell XPAC-09 CO Specifications