Need help?Do you have a question about the Cooper & Hunter Supreme CH-S18FTXAM2S and is the answer not in the manual?
Overview of the indoor and outdoor units and the remote controller.
Detailed technical specifications for the indoor and outdoor units.
Visual representation of the indoor and outdoor unit dimensions.
Schematic illustrating the refrigerant flow within the unit.
Wiring diagrams and PCB layouts for the unit's electrical components.
Explanation of the remote controller's functions and display icons.
Essential safety precautions and guidelines for installation and maintenance.
Step-by-step guide for installing the indoor and outdoor units.
Criteria for choosing optimal indoor and outdoor unit placement.
Guidelines for safe and correct electrical wiring and connections.
Procedures for system evacuation and leak testing.
Steps to verify correct installation and test operation.
Table of malfunction codes and their possible causes.
Flowcharts and steps for diagnosing and fixing common issues.
Methods for addressing common operational issues and sounds.
Illustrated parts breakdown and list for the indoor unit.
Illustrated parts breakdown and list for the outdoor unit.
Step-by-step instructions for disassembling the indoor unit.
Step-by-step instructions for disassembling the outdoor unit.
Guidelines for connection pipe length, refrigerant oil, and charging amounts.
Instructions for proper pipe expansion to prevent refrigerant leaks.
Reference tables for sensor resistance values at various temperatures.
General| Heating Seasonal Performance Factor (HSPF) | 10 |
|---|---|
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 55 dB(A) |
| Voltage | 208-230V |
| Phase | 1 |
| Compressor Type | Inverter |
| Power Supply | Outdoor |
| Coefficient of Performance (COP) | 4.0 |
| Outdoor Unit Weight | 42 kg |
| Type | Heat Pump |
| Cooling Capacity | 18000 BTU/h |
| Outdoor Unit Dimensions (WxHxD) | 830x655x310 mm |
| Indoor Unit Weight | 14 kg |
To Next Page
