Cooper Bussmann 1000W - Tools and Materials

9

Installation Tools and Materials



To install the Cooper Bussmann Inverter, the following tools/materials are
recommended:


Wire strippers

 Mounting screws or bolts

 #2 Phillips screwdriver

 Wrench or socket for DC terminals (1/2 inch or 13mm)

 AC cable (i.e. 3-prong, standard wall cable), sized appropriately for load/application

 Wire nuts or crimp connectors for AC wire and appropriate tools

 DC cable, sized appropriately for load/application

 Lugs for DC cables to mount on size M8 x 1.25 studs. DC stud terminals and
appropriate tools(i.e. crimping tool)
 Lug for Chassis Ground cable to mount on size M6 x 1.00 stud. DC stud terminal and
appropriate tools(i.e. crimping tool)
 AC and DC disconnects and over-current protective devices