Need help?Do you have a question about the Cooper Menvier Scantronic 9651 and is the answer not in the manual?
Explains the general procedure and various methods for setting the alarm system.
Provides a step-by-step guide on how to set the alarm system using the keypad.
Offers guidance on resolving problems that prevent the system from setting, focusing on active detectors.
Details the general procedure and considerations for unsetting the alarm system.
Details the procedure for responding to a fire alarm, emphasizing evacuation and contacting the Fire Brigade.
Outlines steps for unsetting, resetting, and viewing alerts after non-fire alarms.
Explains how to view system alerts, their status (active/inactive), and how viewing acknowledges them.
Explains how the master user can set up new user access codes and assign them to individuals.
Details the procedure for setting new access codes for users, including default values and ranges.
Describes how to assign a duress code for silent alarm communication during forced unsetting.
General| Max Zones | 8 |
|---|---|
| Part Set Suites | 4 |
| Outputs | 4 programmable outputs |
| Keypads Supported | 4 |
| Voltage | 12V DC |
| Power Supply | 230V AC, 50Hz |
| Battery Backup | Yes |
To Next Page
