Cooper Security 4601-50

To Next Page

Pendant Transmitter

4601-50/60 PENDANT TRANSMITTER

Description

The 4601-50/60 are narrow-band, FM radio transmitters compatible with any

Scantronic 4600 radio receivers, and are designed to be used as an alarm trigger in

dispersed alarm units, nursecall systems and as a panic button in security and call

systems. The 4601-60 can be used as a remote setting device with the 4600 radio

intruder alarm panel.

Hardware

The units are supplied in an attractive, ABS, re-retardant, plastic housing with a

exible, tactile, trigger button moulded in neoprene rubber. The non-allergenic, silicone

rubber aerial cord of the 4601-50 version enables the user to wear the unit around his

or her neck. The unit has a degree of splash resistance but it is not designed to be

immersed in water.

Operation

The 4601-50/60 is triggered by depressing the orange button on the front of the unit.

Transmission is conrmed by a top-facing, red, LED

, which stays lit for around 4

seconds.

Performance

The 4601-50/60 pendant transmitter is designed to operate over short distances, the

actual range depends on the receiver aerial and the nature of the receiving path. As a

reference, the 4601-50 pendant transmitter / 4618 receiver + half-wave dipole aerial

combination gives a range in excess of 300 metres over at, open ground: the

following multipliers should assist range estimates.

rotcaFhtaP

1thgis-fo-enil ,nepO

9.0-3.0htap derucsbo ,nepO

5.0-2.0aera pu-tliuB

3.0-0.1)kcirb( gnidliub nI

In building (re-inforced concrete) 0.05-0.3

2-50.0slennut nI

The 4601-60 has a reduced, at, open-ground range of 150 metres with the same

aerial combination.

Battery Life

The 4601-50/60 transmitters are powered by lithium-manganese-dioxide batteries,

which are

designed to give at least 20,000 operating cycles, or 3 years life if used twice

per day.

The battery is permanently soldered to the transmitter and is not designed to be user-

changeable. If the battery needs changing, return the whole unit, including the case, to

your distributor or direct to Scantronic Service Department.

Need help?

Do you have a question about the Cooper Security 4601-50 and is the answer not in the manual?

Summary

Product Description and Hardware

Description

Details the 4601-50/60 as narrow-band, FM radio transmitters for alarm triggers and panic buttons.

Hardware Features

Describes the transmitter's attractive ABS housing, flexible trigger button, and splash resistance.

Operation and Performance

Operation

Explains the unit is triggered by an orange button, with transmission confirmed by a red LED.

Performance and Range

Covers operational range, dependent on path, with specific multipliers for different environments.

Battery Life

Details battery type, expected cycles, lifespan, and non-user-replaceable nature.

Setup, Care, and Options

Battery Care Instructions

Provides safety warnings regarding battery fire, opening, impact, and disposal.

Coding Procedure

Guides on opening the case and setting DIL switches for receiver compatibility.

Re-assembly and Sealing

Instructions for reassembling the case, securing screws, and re-sealing for water resistance.

Accidental Immersion Caution

Advises on drying and re-sealing procedures after accidental immersion in liquids.

Optional Clip Accessory

Describes an optional clip for attaching the transmitter to clothing.

Product Obsolescence Notice

Customer Advice Notice

Informs about the obsolescence of 4600 series products and suggests the 700R range as an alternative.

Declaration of Conformance

Conformance Statement

Certifies that the equipment complies with the 1995/5/EC R&TTE Directive.