Need help?Do you have a question about the Cooper FX range and is the answer not in the manual?
General| Operating Temperature | -10°C to +55°C |
|---|---|
| Weight | 150g |
| Relative Humidity | ≤ 95% (non-condensing) |
| Color | White |
| Standards Compliance | EN54-3 |
Instructions for installing the fire alarm panel in a suitable environment.
Mains power supply and battery connection details for the fire alarm panel.
Explains End of Line Monitor units (EOLM-1) and zone circuit termination.
Details sounder circuit wiring for different panel zone configurations.
Describes auxiliary relays for fault, fire, and class change functions.
Information on the RS485 repeater output and its wiring.
Procedures for installation checks, zone, and sounder circuit testing.
Steps to test and commission the fire alarm system after installation.
Details access codes and functions for users like silencing and resetting.
Disabling and enabling zones and sounder circuits via access codes.
Using detector self-check intelligence and LED diagnostics.
Daily, weekly inspections and call point tests performed by the user.
Quarterly, six-monthly, and annual tests conducted by service providers.
Accessing engineer codes, walk test, and latch on fault facilities.
Table showing panel indications for various situations.
Details panel types, zones, detectors, voltage, and dimensions.
To Next Page