EasyManua.ls Logo

CooperSurgical RI INTEGRA 3 User Manual

CooperSurgical RI INTEGRA 3
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
RESEARCH INSTRUMENTS LTD
Bickland Industrial Park, Falmouth, Cornwall, TR11 4TA, UK
Tel: +45 4679 0202 | Email: customerservice@origio.com | origio.com
0120
Document 6-54-701UM, Issue 9, DRF 4525, 19 September 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the CooperSurgical RI INTEGRA 3 and is the answer not in the manual?

CooperSurgical RI INTEGRA 3 Specifications

General IconGeneral
CategoryLaboratory Equipment
ManufacturerCooperSurgical
ProductRI INTEGRA 3
Power Requirements100-240 VAC, 50/60 Hz
CO2 Range0 to 20%
O2 Range1 to 20%
Shelving TypeStainless Steel
DisplayTouchscreen
Data LoggingYes
CertificationsCE

Summary

Safety Warnings

Guidance & Manufacturer's Declaration - Electromagnetic Emissions

Specifies EMC compliance and guidance for the Integra 3's electromagnetic environment.

Guidance and Manufacturer's Declaration - Electromagnetic Immunity

Details immunity test levels and electromagnetic environment guidance for the Integra 3 system.

Basic Operation

Petri Dish Positioning

Describes how to position the Petri dish on the stage for viewing specimens.

Heated Stage Plate

Explains the function of the heated stage plate for positioning dishes.

Heated Metal Inserts

Details how to place Petri dishes on heated metal inserts and their securing mechanism.

Heated Glass Inserts

Explains placement of Petri dishes on heated glass inserts and handling precautions.

Fitting Micropipettes

Step-by-step guide on how to fit standard 1.0mm diameter glass micropipettes.

Inserting MPH into Toolholder

Instructions on how to insert the Micropipette Holder (MPH) into the toolholder.

Initial Pipette Set-up Diagram

Illustrates the setup for initial pipette adjustment.

Initial Pipette Set-up Instructions

Step-by-step guide for initial pipette setup, including calibration.

Pipette Angle Adjustment

Explains how to adjust pipette angle for different procedures.

Routine Pipette Set-up

Provides steps for setting up pipettes for routine procedures.

Shut Down Procedure

Steps to safely shut down the Integra 3 system.

Electronic Control System

Display

Describes the main screen of the Integra 3, showing temperature and control icons.

Temperature Control

Setting the Temperature

How to modify setpoint temperatures for heating systems.

Adjusting Specimen (Setpoint) Temperature

Guidance on adjusting setpoints for accurate specimen temperature.

Temperature Calibration

Process to calibrate displayed temperature to actual temperature.

Calibrating Heated Plates

Steps for calibrating heated stage plates and metal/glass inserts.

Calibrating Thermosafe Air Heating System

Procedure to calibrate the Thermosafe air nozzle temperature.

Alarms and System Status

Troubleshooting

Manipulation

Troubleshooting steps for issues related to lever stiffness and objective clearance.

Temperature Controller

Troubleshooting for issues with heated stage temperature being too hot or cold.

Alarm Code Tables

Lists error messages, priority, fault descriptions, actions, and solutions for system alarms.

Care and Maintenance

Related product manuals