Need help?Do you have a question about the COP Security inspire black 960h and is the answer not in the manual?
Guides on configuring the app to connect to the DVR using its IP address.
Details configuring smartphone apps to connect to the DVR.
Introduces the feature for changing DVR settings like recording and events.
Details the PTZ interface and functions like pan, tilt, zoom, and iris.
Describes the DVR's behavior and default settings upon powering up.
Recommends using the power button for safe shutdown and logging.
Details how to log into the engineer menu using front panel, mouse, IR remote, or keypad.
Provides step-by-step instructions to log out from the engineer menu.
Lists default settings for language, resolution, network, and recording.
Explains the requirements and connection method for a direct PC link using a crossover cable.
Guides on accessing the DVR through a web browser on a local PC.
Details connecting the DVR to a modem/router for internet access.
Explains necessary router settings like port forwarding for remote access.
Lists requirements and steps for installing viewing apps on smartphones.
Guides on setting the DVR's internal clock and time format.
Explains how to set HDD overwrite to record continuously or stop when full.
Guides on creating new user accounts with specific username and password.
Explains how to assign specific access rights to user accounts.
Guides on how to remove existing user accounts from the DVR.
Explains the procedure for changing passwords for existing user accounts.
Explains how to mask specific areas of a camera's view for privacy.
Details selecting the correct PTZ protocol and baud rate for communication.
Guides on setting PTZ camera IDs and configuring preset positions.
Guides on setting and saving PTZ camera preset positions using the DVR or keyboard.
Details settings for recording quality: normal, high, or super high.
Explains resolution choices like CIF, 2CIF, D1, and 960H.
Details how frame rate affects recording quality and HDD usage.
Guides on setting the normal record quality level.
Guides on setting the normal record resolution.
Guides on setting the normal record frame rate.
Details settings for event recording quality: normal, high, or super high.
Explains resolution choices for event recording: CIF, 2CIF, D1, 960H.
Details how frame rate affects event recording quality and HDD usage.
Guides on setting the event record quality level.
Guides on setting the event record resolution.
Guides on setting the event record frame rate.
Explains how to program the DVR's recording schedule by day and hour.
Explains the difference between Static IP and DHCP for network setup.
Details the configuration of IP address, subnet mask, gateway, and DNS servers.
Explains the purpose of various network ports used by the DVR.
Guides on setting up email alerts for events, including authentication and JPG attachments.
Explains how to set up DDNS for dynamic IP addresses to enable remote access.
Guides on restricting network access to a list of approved IP addresses.
Explains how to block specific IP addresses from accessing the DVR.
Guides on setting alarm inputs to normally open (N.O.) or normally closed (N.C.).
Details possible actions when an alarm is triggered: record, PTZ preset, alarm out, buzzer, email, FTP.
Guides on enabling motion detection and setting its sensitivity level.
Explains how to select and deselect areas for motion detection monitoring.
Details possible actions when motion is detected: record, PTZ preset, alarm out, buzzer, email, FTP.
Warns about data erasure and guides on formatting the HDD.
General| Brand | COP Security |
|---|---|
| Model | inspire black 960h |
| Category | DVR |
| Language | English |
To Next Page
