The Copper Chef Induction Cooktop™ 17
Care & Cleaning
• Note: Unplug the AC Power Cord prior to cleaning the Copper Chef Induction
Cooktop. Do not use any caustic cleaning agents or abrasive scrubbing pads on
the Unit.
• To protect yourself from electric shock, NEVER immerse the device, or the AC
Power Cord in water or other liquids.
• Wipe off the ceramic plate with a warm, damp cloth and a mild, nonabrasive
soap solution.
• Wipe off the outer Unit housing and the Control Panel with a soft cloth or a
mild detergent.
• DO NOT use any petroleum products which will damage the outer Unit
housing and the Control Panel.
• DO NOT
near the device, as this may reduce the service life of the device and lead to
deflagration (fire) when the device is turned on.
• Make sure that the bottom of the cookware does not scrape across the surface
of the Cooktop. A scratched surface will not impair the use of the device.
• Make sure that the device is properly cleaned before storing it in a dry place.
• DO NOT stack many heavy objects on top of the Unit. Excessive weight could
possibly damage the Unit.
The Copper Chef Induction Cooktop
TM
is easy to clean. It has a
continuous surface with no dirt traps, and the controls are touch-
sensitive, so there are no knobs to clean around. Because the surface
doesn’t get as hot as other electric cooktops, most spillage won’t bake
on – although you do have to be careful with sugar because it can
burn on and create an uneven surface.
To Next Page
Loading...