To Next PageTo Next Page
Need help?Do you have a question about the Copystar Ri 2530 and is the answer not in the manual?
Lists of service manuals, parts lists, and operation guides for the Ri 2530/3530.
Details on essential accessories like Print/Scan System, Fax System, and various finishers.
Listings for SRDF-2, DF-71, DF-75, and related accessories like mailboxes and adapters.
Information on optional hardware such as Hard Drive, Attachment Kits, and Memory.
Details on Toner cartridge yield (34,000 prints) and cost per copy for Ri-2530.
Yield information for MK-7052 Maintenance Kit components, including Drum, Developer, Fixing, Transfer.
Toner cartridge yield (34,000 prints) and cost per copy for Ri-3530.
Yield information for MK-7052 Maintenance Kit components for Ri-3530.
Details on EP-ROM file numbers, descriptions, locations, and check sums.
Information on ordering blank EP-ROMs for software updates.
List of PCB names, new P/Ns, repair P/Ns, and repair prices.
Policy for returning defective PCBs under warranty and out of warranty.
Details on type, copying system, paper handling, copy sizes, magnification, and copy speed.
Information on first copy time, warm-up time, paper feed system, and photoconductor details.
Details on charging system, exposure light, developing, transfer, fixing, and cleaning systems.
Preventative Maintenance cycle and max monthly volume for Ri 2530 and Ri 3530.
Specifications for bit map memory, image storage, resolution, dimensions, and weight.
Specifications for the AD-63 Duplex Unit, including paper type and power source.
Specifications for the DF-78 Internal Finisher, including trays and stapling limit.
Specifications for PF-70 (Dual 500 Sheet) and PF-75 (3,000 Sheet) paper feeders.
Specifications for the J-1402 Job Separator, including tray capacity and paper types.
Specifications for the SRDF-2 document feeder, including original feed, sizes, and modes.
Details on DF-75 stacking options, feed reference, paper weight, and stapling modes.
Specifications for DF-71 finisher tray capacity for various stapling counts.
Specifications for the optional Printer Scanner Kit, including CPU, RAM, and network interface.
Details on scan system type, basic function, interface, resolution, and scanning speed.
Specifications for the optional Fax Kit, including memory, transmission speed, and resolution.
Information on Main PCB and Printer Board memory management and upgradeable DIMMs.
Details on fax modulation, coding, transmission speed, and modem signal detection.
Table showing transmission speed (bps) for different modulation methods.
Visual chart showing various optional components and their relationships.
Important notes regarding the attachment of DF-71, DF-75, and J-1402 finishers.
Lists of service manuals, parts lists, and operation guides for the Ri 2530/3530.
Details on essential accessories like Print/Scan System, Fax System, and various finishers.
Listings for SRDF-2, DF-71, DF-75, and related accessories like mailboxes and adapters.
Information on optional hardware such as Hard Drive, Attachment Kits, and Memory.
Details on Toner cartridge yield (34,000 prints) and cost per copy for Ri-2530.
Yield information for MK-7052 Maintenance Kit components, including Drum, Developer, Fixing, Transfer.
Toner cartridge yield (34,000 prints) and cost per copy for Ri-3530.
Yield information for MK-7052 Maintenance Kit components for Ri-3530.
Details on EP-ROM file numbers, descriptions, locations, and check sums.
Information on ordering blank EP-ROMs for software updates.
List of PCB names, new P/Ns, repair P/Ns, and repair prices.
Policy for returning defective PCBs under warranty and out of warranty.
Details on type, copying system, paper handling, copy sizes, magnification, and copy speed.
Information on first copy time, warm-up time, paper feed system, and photoconductor details.
Details on charging system, exposure light, developing, transfer, fixing, and cleaning systems.
Preventative Maintenance cycle and max monthly volume for Ri 2530 and Ri 3530.
Specifications for bit map memory, image storage, resolution, dimensions, and weight.
Specifications for the AD-63 Duplex Unit, including paper type and power source.
Specifications for the DF-78 Internal Finisher, including trays and stapling limit.
Specifications for PF-70 (Dual 500 Sheet) and PF-75 (3,000 Sheet) paper feeders.
Specifications for the J-1402 Job Separator, including tray capacity and paper types.
Specifications for the SRDF-2 document feeder, including original feed, sizes, and modes.
Details on DF-75 stacking options, feed reference, paper weight, and stapling modes.
Specifications for DF-71 finisher tray capacity for various stapling counts.
Specifications for the optional Printer Scanner Kit, including CPU, RAM, and network interface.
Details on scan system type, basic function, interface, resolution, and scanning speed.
Specifications for the optional Fax Kit, including memory, transmission speed, and resolution.
Information on Main PCB and Printer Board memory management and upgradeable DIMMs.
Details on fax modulation, coding, transmission speed, and modem signal detection.
Table showing transmission speed (bps) for different modulation methods.
Visual chart showing various optional components and their relationships.
Important notes regarding the attachment of DF-71, DF-75, and J-1402 finishers.
General| Type | Digital Copier |
|---|---|
| Function | Copy, Print, Scan |
| Print Speed (Black) | 25 ppm |
| Print Resolution | 600 x 600 dpi |
| Monthly Duty Cycle | 50, 000 pages |
| Max Paper Size | A3 |
| Memory | 256 MB |
| Connectivity | USB, Ethernet |
| Copy Magnification | 25% - 400% |
| Warm-up Time | 30 seconds |
