9
Wet/Dry Filtration
Observe and make sure that the water circulation is
owingproperlyfromtheaquariumsectionthrough
the wet/dry section.
Step 1:
Water proceeds into surface and bottom intake.
Step 3:
Waterowsthroughtheoverowtray,thentrickles
down through the media tray.
Step 2:
Waterpassesthroughltercartridge.
Step 4:
Watergoesthroughthespongelterinto
the water pump.
Step 5:
Water is pumped into the aquarium through the
output discharge nozzle.
PRECAUTIONS:
Foroptimallterperformance
1. Do not block or obstruct surface intake and
bottom intake.
2. Do not block or obstruct output discharge nozzle.
3. Performscheduledmaintenanceonlter
cartridge.
4. Observe scheduled maintenance on water pump.
5. Make sure to perform scheduled water changes
and BioCube
®
ltrationmaintenance.
WET/DRY FILTRATION OPERATION
FIGURE 10
FIGURE 11
FIGURE 7
FIGURE 8
FIGURE 9
Surface
Intake
Bottom
Intake
Filter Cartridge
(Mechanical
Filtration
and Chemical
Filtration)
Media Tray
(Biological
Filtration)
Output
Discharge
Nozzle
Sponge Filter
(Micro-Bubble
Diffuser)
Water Pump