To Next PageTo Next PageHow to fix a Coralife Turbo-Twist 12x UVC lamp that is not working?
If the UVC lamp on your Coralife Laboratory Equipment isn't working, there are several potential causes: * First, ensure the plug is securely connected to the power supply. If it's not, connect it. * Second, check if the UVC lamp base is loose. If it is, push the UVC lamp onto the socket until you hear a 'click'. * Finally, the lamp may have expired and needs replacement.
What to do if there is a water leak between the main body and hose lock nuts of my Coralife Turbo-Twist 12x Laboratory Equipment?
If you notice a water leak between the main body and hose lock nuts on your Coralife Laboratory Equipment, the cause might be: * The hose lock nut is loose. Try tightening the hose barb or the hose lock nut. * The O-ring is not in place. Make sure to install the O-ring.
General| Brand | Coralife |
|---|---|
| Model | Turbo-Twist 12x |
| Category | Laboratory Equipment |
| Language | English |
Guides on how to set up and position the UV sterilizer unit correctly for optimal performance.
Instructions for installing the mounting bracket to secure the sterilizer unit.
Step-by-step guide for installing the UVC lamp into the sterilizer unit.
Procedures for reassembling the unit after maintenance or lamp replacement.
Details on attaching hose lock nuts and hose barb adapters for water flow connections.
Guidance on physically installing the unit, including hang-on and horizontal positioning.
Connects the sterilizer to the water flow system, recommending prefilters.
Procedures to start and check water flow through the sterilizer, including air removal.
Instructions on connecting the unit to power and verifying UVC lamp operation.
Detailed steps for cleaning the quartz sleeve to ensure optimal UV sterilizer performance.
Explains the UVC lamp's lifespan and provides instructions for its replacement.
