Water Pump not Included.Water Pump not Included.
SPECIFICATIONS
PARTS DIAGRAM
HOSE LOCK NUT
O-RING GASKET
QUARTZ HOUSING
UVC LAMP
PLUG
FLAT O-RING
MAIN
BODY
O-RING
TANK
BRACKET
TURBO-TWIST
BRACKET
HOSE BARB
ADAPTER
HOSE LOCK NUT
SUCTION
CUP
THREADED-CAP
INSTRUCTIONS
Always disconnect the unit from the power supply before
installing the Turbo-Twist.
The Turbo-Twist provides superior aquarium health and
appearance by eliminating most harmful microorganisms.
Set-up and positioning
Adjusting the hose barb
inlet and outlet.
The hose barbs can be
positioned in four different locations
to facilitate connections to other
applications.
QUARTZ SLEEVE
(PICTURE 1)
QUARTZ HOUSING
QUARTZ
HOUSING
MAIN
BODY
MAIN BODY
(PICTURE 2)
(PICTURE 3)
(PICTURE 4)
(PICTURE 5)
Lift the red safelock and unlock the
quartz housing. (Picture 1)
Carefully twist the quartz housing
and the main body opposite of each
other. (Picture 2)
Combine the main body with the quartz
housing and rotate according to the
arrowhead "close". (Picture 4)
Press in the red safelock and the UV
Sterilizer is now ready to install.
(Picture 5)
The quartz housing can now be
rotated 360
o
. (Picture 3)
Adjust the orientation of the hose
barb and set the main body into the
quartz housing.
HOSE
BARB
OUTLET
HOSE
BARB INLET
Article Turbo-Twist 3x UV Sterilizer
UV Lamp 9 watt
Rated Voltage AC120V
Rated Cycle 60Hz
Rated Power 10.2 watt
Wavelength of UV Radiation 253.7mm
Life of UV Lamp Approx. 8000 hours
Aquarium Volume Tre ats up to 125 gallon saltwater or freshwater aquariums
Flow Rate 100-200 gallons per hour
Size of O-ring Inner 12/outer 16mm, inner 16/outer 22mm
Cord Length Approx. 9 ft.
Irradiation of UV Radiation 9,580 W/cm
2
(value @ 20mm distance from the UV lamp)
O-RING
HOSE BARB
ADAPTER
LAMP ON INDICATOR
To Next Page
Need help?
General
