Make sure that the base of your pan is smooth, sits flat against the glass, and is the same
size as the cooking zone. Use pans whose diameter is as large as the graphic of the zone
selected. Using a pot a slightly wider energy will be used at its maximum efficiency. If you
use smaller pot efficiency could be less than expected. Pot less than 140 mm could be
undetected by the hob. Always center your pan on the cooking zone.
Always lift pans off the hob – do not slide, or they may scratch the glass.
3.3 How to use
3.3.1 Start cooking
Touch the ON/OFF key (1) for one second. After power on,
the buzzer beeps once, all displays show as below, indicating
that the hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to
use.
•
Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Touching the IndicatorA.B.C to choose the cooking zone, and
an indicator you chose will flash.
To Next Page
Loading...
