第 4 页
4
Do not arbitrarily disassemble or reconstruct the beverage cooler , nor
damage the refrigerant circuit; maintenance of the appliance must be
conducted by a specialist.
Damaged power cord must be replaced by the manufacturer, its maintenance
department or related professionals in order to avoid danger.
Do not spray or wash the cooler; do not put the cooler in moist places easy to
be splashed with water so as not to affect the electrical insulation properties
of the cooler.
Do not give package and other components to children to play. The bending
board and plastic film may lead to suffocation! Do not allow children to enter
or climb the cooler to prevent that children are sealed in the cooler or children
are injured by the falling cooler.
Do not place heavy objects on the top of the cooler considering that
objects may fall when open or close the door, and accidental injuries
might be caused.
Do not use cooler body, cooler door, etc. as pedal or support.
The gaps between cooler door and cooler body are small, be noted not to
put your hand in these areas to prevent from squeezing the finger. Please be
gentle when close or open the cooler door to avoid falling articles.
1.4 Related warnings for use
To Next Page
Loading...
