EasyManua.ls Logo

CORBERO CLVM605X - Filling the Rinse Aid Reservoir

CORBERO CLVM605X
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
3
Close the rinse aid reservoir cap by
rotating it clockwise.
Carefully pour in the rinse-aid into
its dispenser, whilst avoiding it to
overflow.
NOTE:
Clean up any spilled rinse aid with
an absorbent cloth to avoid
excessive foaming during the next
wash.
1 2
Remove the rinse aid reservoir cap
by rotating it counterclockwise.
Filling The Rinse Aid Reservoir
Adjusting the rinse aid reservoir
Turn the rinse aid indicator dial to a number. The higher the
number, the more rinse aid the dishwasher uses.
If the dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or a
bluish film on glassware or knife blades.

Related product manuals