Cleaning the aluminum grease filter
WARNING: Risk of fire!
-- Grease residues on the aluminum filter can ignite if exposed to high temperatures. It is therefore important
that the grease filter is cleaned/replaced regularly. Cleaning the aluminum grease filter
-- Grease and fumes are deposited in the filter and can build up if not cleaned regularly. We recommend that
you clean the grease filter monthly:
• Remove the aluminum grease filter by sliding the latch back into the slot, gently push the filter and pull it
forward.
• Wash the grease filter in a solution of hot water and neutral detergent. Immerse the filter in the solution.
• Then clean with a soft brush, rinse well with warm water and let dry.
• Alternatively, the grease filter can also be washed in a dishwasher (up to 60 °C). Slight discoloration may
occur in the dishwasher. This does not affect the function of the grease filter.
Activated carbon filter replacement
The activated carbon filter absorbs odors and must be replaced at least every six months,
depending on usage. Order the charcoal filter from your dealer or accessory store. To order, use the
reference number indicated in the "Technical data".
• See "Installation of activated carbon filter for recirculation mode".
• Remove the old charcoal filter by turning it counterclockwise.
lamp replacement
WARNING:
Let the lamp cool down before replacing it. There is a risk of burns!
• Use the correct bulb: 1*1.5 LED or 2*1.5W LED
• Remove the aluminum grease filter
• Remove the burnt out bulb and insert the new one.
• Reinstall the aluminum grease filter
To Next Page
Loading...