Corbin Russwin DC6210 Series User Manual

Installation InstructionsInstallation Instructions
Universal Door Closers
with Heavy Duty
Spring Stop Parallel Arms
IMPORTANT:
An improperly installed or incorrectly adjusted door closer may cause
or and will void product warranty.
To avoid personal injury,
property
damage personal injury;
DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.
Door closers must be securely fastened to a properly reinforced door and frame
with fasteners provided.
Door closers with a HOLD OPEN ARM (A12) are not permitted to be installed in fire
door assemblies.
Door and frame must be specifically templated for 85°, 90°, 95°, 100°, 105° or
110° door swing.
TO DETERMINE
HAND OF
YOUR DOOR:
LEFT
HAND
DOOR
RIGHT
HAND
DOOR
Size of Door & Door Closer
Type
of
Installation
Interior
Exterior
In -swinging
Exterior
Out -swinging
Recommended
Closer Size
**Max.
Opening
Force
lbs/f
24
26
30
36
40
46
'"
'"
'"
'"
'"
'"
26
30
*3 6
*4 0
'"
'"
'"
'"
8
14
16
22
24
26
1
2
3
4
5
6
*DC6410 Series Recommended
**NOTE: These forces are for standard templating with bearing type hinges and do not account for pressure differentials and draft. Half size
closers DC6410 are capable of being adjusted to next higher setting.
Parallel
Arm
RHR
LHR
80-9360-6003-152 Rev. 12/06
DC6210 Series
DC6410 Series
Multi-Sized 1 thru 6
Half-Size 1 thru 6
A11 - Non-Hold Open Arm
STANDARD APPLICATION
WITH 615F58 BRACKET
DEEP REVEAL APPLICATION WITH
M103 OPTION(615F59 CLAMP KIT)
FLUSH PARTITION APPLICATION WITH
M104 OPTION (615F60 BRACKET)
A12 - Hold Open Arm

Corbin Russwin DC6210 Series Specifications

General

Application	Commercial
Arm Type	Regular Arm, Parallel Arm
Backcheck	Adjustable
Closing Speed	Adjustable
Latching Speed	Adjustable
Series	DC6210
Type	Door Closer
Handing	Universal
Door Thickness	1-3/4"
Compliance	ANSI/BHMA A156.4, Grade 1
Mounting	Regular Arm, Parallel Arm, Top Jamb
Spring Size	1-6
Door Width (Interior)	Up to 48" (1219 mm)
Door Width (Exterior)	Up to 48" (1219 mm)
Opening Angle	180 degrees
Certifications	ANSI/BHMA A156.4, Grade 1

Summary

Installation Instructions

Parallel Arm Application Types

Identifies Non-Hold Open (A11) and Hold Open (A12) parallel arm applications.

Application Mounting Options

Details standard, deep reveal, and flush partition mounting configurations.

Important Safety and Usage Notes

Crucial warnings regarding installation, disassembly, fire doors, and door swing.

Determine Door Hand

Guidance to identify the correct hand (left or right) for door installation.

Door Closer Templates and Mounting

Template Dimensions and Door Reveals

Provides template details for standard, deep reveal, and flush partition applications.

Mounting Screw Specifications

Details required screw types and sizes for mounting the closer bracket.

Specific Application Templates

Deep Reveal and Flush Partition Templates

Detailed templates for deep reveal and flush partition mounting configurations.

Install Closer Bracket and Mount Body

Instructions for installing the closer bracket and mounting the closer body.

Arm Connection and Hold Open Adjustments

Connect Arm to Closer Body

Procedure for connecting the parallel arm to the closer body, including spindle rotation.

Hold Open Adjustments (A12 Arms)

How to adjust the hold open function for A12 arms, controlling force and position.

Door Closer Adjustments and Installation

Spring Power Adjustment and Sizing

Guide to adjust spring power based on door size using the provided chart.

Speed and Action Valve Adjustments

Instructions for adjusting closing speed, latching speed, and delayed action.

Backcheck Valve Adjustments

Details on adjusting backcheck location and intensity for cushioning.

Installing Closer Covers

Steps for installing standard or slim covers after adjustments.