Core Products LD240 - User Manual

Height:400mm
Width:900mm
Depth:400 mm
30min
storage trunk
REF. LD240
BATCH NUMBER
Please check that you have all the correct
parts and fittings as detailed on the
assembly instructions.
We recommend that you build your
furniture on top of a soft clean cover to
ensure the unit does not get marked or
damaged during assembly.
FOR DAMAGED/REPLACEMENT PARTS Please
visit
www.coreproducts.co.uk/parts
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE / RECEIPT FOR FUTURE REFERENCE.
Core Products 08/2022
Page 1
7262
PLEASE USE THESE ASSEMBLEY INSTUCTIONS
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY
please store the carton at room temperature for 48 hours or more co the contents can
acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your furniture.
This furniture has been manufactured from surface coated wood based manufactured boards.
Caring for your furniture.
Extreme temperature can cause slight movements in the board material so please avoid placing your furniture close to
radiators or other sources of heat.
Please avoid exposing your furniture to continued bright sunlight as this can affect the colour,
any fluid spills should be removed as quickly as possible
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Use mats or coasters to help protect against heat.
Do not stand on your furniture .
Aftercare.
Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture Polish, do not use detergents or
chemicals on your furniture.
After assembly remove any visible component identification stickers, these should remove easily however any remaining
adhesive residue can be removed with a label adhesive removal liquid available from most DIY or hardware stores.
For models with drawers we also recommend you use a household spray polish or curtain track spray on the drawer runner
tracks. Please do not use any wax based products, chemicals or detergents on this furniture.
Regularly check all fixings to ensure they are tight.

Summary

Storage Trunk Assembly Instructions

Product Information and Care

Details on furniture material, protection from heat/light, spill handling, and proper lifting techniques.

Aftercare and Maintenance

Guidance on cleaning, removing adhesive stickers, and checking fixings for furniture longevity.

Parts and Hardware Identification

Assembly Hardware List

Lists and quantities of all hardware components, including screws, cams, and fittings, required for assembly.

Furniture Components Overview

Visual identification of the main wooden and panel parts that constitute the storage trunk.

Maximum Suggested Loads

Specifies the maximum weight capacity the assembled furniture unit can safely support.

Final Assembly Steps

Remove Protective Films

Instruction to peel off protective films from all main component surfaces after the furniture is assembled.

Detailed Assembly Guide

Step 2: Attach Panels

Connects main panels using specified hardware, detailing screw types and quantities for secure assembly.

Step 3: Install Hinges

Attaches hinges to the unit using screws, specifying hardware and quantities for proper door mounting.

Step 4: Secure Base Panel

Fastens the base panel with screws and cam locks, detailing hardware usage and placement.

Step 5 & 6: Cam Lock Mechanism

Explains the use and tightening of cam locks for joining furniture parts, ensuring a secure fit.

Step 7: Door Fitting and Adjustment

Guides on attaching doors and adjusting hinges for proper alignment and smooth operation.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document provides assembly instructions and product information for the REF. LD240 storage trunk.

Function Description

The LD240 is a storage trunk designed for general storage purposes. It is a piece of furniture intended to provide enclosed storage space, likely for items such as blankets, toys, or other household goods. The design suggests a simple, rectangular box-like structure with a hinged lid, allowing for easy access to its contents. The inclusion of hinges and a locking mechanism (F*1) indicates that the lid can be securely closed.

Important Technical Specifications

• Product Reference: LD240
• Product Type: Storage Trunk
• Assembly Time: Approximately 30 minutes
• Dimensions:
  • Height: 400mm
  • Width: 900mm
  • Depth: 400mm
• Max Suggested Load: 20kg
• Materials: Manufactured from surface-coated wood-based manufactured boards.
• Hardware Components:
  • A*20: 40mm dowels (likely for structural connections)
  • B*20: 15x9mm minifix cams (for securing panels)
  • C*4: 8x40mm minifix bolts (for securing panels)
  • D*4: Square feet (for elevating the trunk from the floor)
  • E*3: Hinges (for the lid)
  • F*1: Locking mechanism (likely a latch or catch for the lid)
  • G*38: 3.5x14mm screws (for various fastenings)
  • H*12: Cover caps (for concealing screw heads or minifix cams)
• Assembly Parts (Numbered Diagram):
  • Part ①: Top panel (likely the lid)
  • Part ②: Front panel
  • Part ③: Side panel (left)
  • Part ④: Side panel (right)
  • Part ⑤: Back panel
  • Part ⑥: Bottom panel

Usage Features

• Storage Capacity: The trunk offers a significant internal volume for storing various items, with a maximum load capacity of 20kg.
• Lid Access: Equipped with hinges (E*3), the lid (Part ①) allows for easy opening and closing.
• Security/Closure: The inclusion of a locking mechanism (F*1) suggests the lid can be held securely closed, preventing accidental opening.
• Stability: The four feet (D*4) provide stability and elevate the trunk slightly from the floor, which can help protect it from floor moisture or minor spills.
• Aesthetic: The surface-coated boards provide a finished look, and the cover caps (H*12) help maintain a clean appearance by hiding fasteners.
• Adjustable Hinges: The instructions include a section on "ADJUSTING HINGE/DOOR," indicating that the hinges can be fine-tuned for optimal lid alignment and operation.

Maintenance Features

• Acclimatisation: Before assembly, the carton should be stored at room temperature for 48 hours to allow the contents to acclimatise, which helps prevent warping or movement of the board material.
• Temperature Sensitivity: The furniture should be kept away from extreme temperatures, such as radiators or other heat sources, to prevent slight movements in the board material.
• Sunlight Exposure: Avoid prolonged exposure to bright sunlight, as this can affect the colour of the furniture.
• Spill Management: Any fluid spills should be removed as quickly as possible to prevent damage.
• Movement: Always lift the furniture when moving it; dragging can cause damage to the furniture or flooring.
• Surface Protection: Use mats or coasters to protect the surface from heat. Do not stand on the furniture.
• Cleaning:
  • Wipe all surfaces with a dry cloth.
  • Occasionally use a normal household furniture polish.
  • DO NOT use detergents or chemicals on the furniture.
  • For models with drawers (though this is a trunk, the general advice might apply to internal runners if present), a household spray polish or curtain track spray can be used on runner tracks.
  • DO NOT use any wax-based products, chemicals, or detergents on this furniture.
• Adhesive Residue Removal: After assembly, visible component identification stickers should be removed. Any remaining adhesive residue can be removed with a label adhesive removal liquid.
• Fastener Checks: Regularly check all fixings to ensure they are tight, maintaining the structural integrity of the trunk.
• Protective Films: After assembly, remember to remove any protective films from all main component surfaces, including the top, sides, and any drawer fronts or doors (if applicable to other models, but for this trunk, likely the top and side panels).
• Parts Replacement: In case of damaged or missing parts, customers are directed to visit www.coreproducts.co.uk/parts.

Core Products LD240 Specifications

General

Brand	Core Products
Model	LD240
Category	Indoor Furnishing
Language	English