User Manual v1.2
6
Push the yellow Ejector upwards and
away from you to open the system.
This releases the Safety-pin.
The Chickenloop opens. The rider is
now only connected to the kite via the
5th Line.
TH E E JE C TOR S Y S TE M
To re-assemble the system hold the
Chickenloop in one hand and push up
the yellow Ejector with the other hand.
Push the metal loop over the Safety-
pin.
Now guide the metal loop and the
Safety-pin back into their designated
grooves.
Be careful that there is no sand or dirt
in the system.
When the Chickenloop and Safety-pin
are in the correct position,
let the yellow Ejector slide back into its
original position.
1 2
3
4 5 6
7 8 10
To Next Page
Loading...
