Need help?Do you have a question about the CornellCookson FS-EP Series and is the answer not in the manual?
General| Brand | CornellCookson |
|---|---|
| Model | FS-EP Series |
| Category | Door Opening System |
| Language | English |
Details motor characteristics like duty cycle, power, speed, and voltage.
Covers electrical specifications including transformer, wiring type, and limit adjustment.
Outlines mechanical aspects like drive reduction, shaft speed, and brake type.
Specifies entrapment protection devices such as sensing edges and photo eyes.
Illustrates and describes various mounting positions for the operator unit.
Step-by-step guide on correctly mounting the operator unit to the door bracket.
Instructions on how to adjust the drive chain for proper tension and slack.
Guidelines and warnings for connecting control wiring to the operator and control station.
Procedures for wiring entrapment protection devices like sensing edges and photo eyes.
Details on connecting the main power supply to the operator, with diagrams for single and three-phase power.
Explains the various control functions and switch settings available on the operator's main board.
Procedures for testing the functionality of push button and key switch control stations.
Diagrams illustrating wiring configurations for 3-button control stations.
Diagrams showing wiring for key switches combined with stop button functionality.
Wiring diagrams for 3-button stations incorporating key lockout mechanisms.
Illustrates wiring differences for key lockout configurations, with and without.
Wiring diagram for a ceiling-mounted pull switch station used for operation.
To Next Page