EasyManua.ls Logo

CORONA Tall Bookcase - User Manual

CORONA Tall Bookcase
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Corona Tall Bookcase
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
floor and the product.
• We strongly recommend that you keep children away from your work area.
Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped off immediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
Page 1
SEC/WG/03/17/MY1
WBF04752(MY)
FOR DOMESTIC USE ONLY
Question and Answer IconNeed help?

Do you have a question about the CORONA Tall Bookcase and is the answer not in the manual?

Summary

Product Care and Maintenance

Assembly Parts List

Assembly Fittings List

Furniture Tipping Warning

Anti-Tip Hardware List

Lists components provided for securing the furniture to the wall to prevent tipping.

Summary

Product Care and Maintenance

Assembly Parts List

Assembly Fittings List

Furniture Tipping Warning

Anti-Tip Hardware List

Lists components provided for securing the furniture to the wall to prevent tipping.

Overview

This document provides comprehensive instructions for the assembly, use, and maintenance of the Corona Tall Bookcase, identified by SEC/WG/03/17/MY1 and WBF04752(MY). It is designed for domestic use and emphasizes safety and proper care to ensure longevity and prevent damage.

Function Description

The Corona Tall Bookcase is a piece of furniture primarily designed for storage and display within a domestic setting. Its multi-shelf structure allows for organized storage of books, decorative items, and other household essentials. The "tall" designation suggests a vertical orientation, maximizing storage capacity while occupying a minimal footprint, making it suitable for various room sizes. The inclusion of adjustable shelves offers flexibility in accommodating items of different heights, enhancing its utility as a versatile storage solution. The overall design appears to be a traditional bookcase, likely intended to complement a range of interior decor styles.

Usage Features

The assembly instructions are presented in a step-by-step graphical format, making the process intuitive for users. Key usage features are embedded within the assembly and care guidelines:

  • Domestic Use Only: The product is specifically intended for use within a home environment, implying it meets safety and durability standards for typical household conditions.
  • Adjustable Shelves (Part 5): The inclusion of three adjustable shelves (03 units) is a significant feature, allowing users to customize the shelf spacing to fit items of varying sizes. This adaptability enhances the bookcase's functionality, enabling efficient use of space for different collections, from tall books to smaller decorative objects.
  • Fixed Shelf (Part 10): In addition to adjustable shelves, there is one fixed shelf (01 unit), which likely provides structural stability and a permanent division within the bookcase.
  • Wall Fixing Recommendation: A critical safety feature highlighted is the recommendation to permanently fix the furniture to the wall to prevent tipping over, which can cause serious or fatal injuries. This emphasizes user safety and stability, especially in homes with children or pets. While wall fixings are not supplied due to varying wall materials, the manual strongly advises using appropriate fixings for the user's specific wall type. This proactive safety measure is a crucial aspect of its intended use.
  • Clear Assembly Guidance: The manual provides explicit warnings against using power tools for assembly, as this can invalidate claims and damage the product, making it unsafe. It also advises assembling the product on a clean, soft surface to prevent damage to the panels. These guidelines ensure that the bookcase is assembled correctly and safely, contributing to its structural integrity and appearance.
  • Optimal Placement Advice: Users are advised not to place the bookcase next to a radiator or in direct sunlight. This guidance is crucial for preserving the wood, preventing expansion, shrinking, or cracking due to temperature fluctuations, thereby extending the product's lifespan and maintaining its aesthetic quality.
  • Avoidance of Dragging/Pushing: The instructions explicitly state not to drag or push the assembled product, as this can damage the joints and compromise its structural integrity. This advice promotes careful handling to maintain the bookcase's stability and durability.
  • Temperature and Humidity Control: The manual recommends maintaining a consistent room temperature to prevent the natural wood from expanding or shrinking. This feature, while not inherent to the product itself, is a vital usage guideline for preserving the material and ensuring the bookcase remains in good condition over time.

Maintenance Features

The manual provides detailed care and maintenance instructions to ensure the longevity and appearance of the Corona Tall Bookcase:

  • Initial Unpacking and Retention of Packaging: Users are advised to keep the original packaging after unpacking. This is a practical maintenance feature, as it facilitates safe return or transport of the product if necessary, protecting it from damage during transit.
  • Pre-Assembly Check: Before commencing assembly, users are instructed to ensure all fittings and parts are present. This prevents incomplete assembly and potential structural issues, contributing to the overall integrity and safety of the product.
  • Clean Assembly Surface: The recommendation to lay a blanket or sheet on the floor during assembly protects both the floor and the product from damage, ensuring the bookcase starts its life in pristine condition.
  • Child Safety During Assembly: Keeping children away from the work area during assembly is a crucial safety measure, preventing accidents and ensuring a focused assembly process.
  • Assembly Location: Assembling the product as close to its final position as possible minimizes the need for moving it after assembly, reducing the risk of damage to joints.
  • Immediate Spillage Wipe-Off: Users are instructed to wipe off any spillage immediately. This is a key maintenance practice for wooden furniture, preventing stains and water damage that can compromise the finish and material integrity.
  • Protection from Hot/Chilled Items: The manual advises against placing hot or chilled items directly on the surface and suggests using a place mat. This prevents heat or moisture rings and other marks, preserving the surface finish.
  • General Cleaning: For general cleaning, a duster is recommended, and the use of detergents of any kind is explicitly discouraged. This gentle cleaning approach prevents damage to the wood finish and maintains its natural appearance.
  • Surface Retreatment: The surface will need to be retreated from time to time. The recommended method is to use unperfumed block wax and rub it over the entire item. This periodic treatment nourishes the wood, protects its surface, and helps maintain its luster and durability.
  • Regular Fitting Inspections: From time to time, it may be necessary to tighten fittings. Regular inspections are advised to ensure all components remain secure, preventing wobbling or structural instability and extending the bookcase's safe operational life. This proactive maintenance helps address wear and tear before it becomes a significant issue.
  • Wood as a Natural Product: The manual educates users that wood is a natural product and can expand, shrink, or crack due to dampness or heat. This information helps users understand the material's characteristics and reinforces the importance of environmental control for proper maintenance.

CORONA Tall Bookcase Specifications

General IconGeneral
TypeBookcase
Depth30 cm
Number of shelves5
MaterialPine
Height180 cm (approximately 71 inches)
Width80 cm (approximately 31.5 inches)
AssemblyRequired
Weight capacity per shelf15 kg (approximately 33 lbs)