Corsair 750D User Manual






 
> Install your motherboard's I/O shield
(see your motherboard’s manual for guidance).
> Align the motherboard with the standos in the case.
> Secure with the included screws (MBD/HDD screws).
Installing the motherboardRemoving the side panels
> Remove the thumbscrews and slide the side panel back and out.
Note: Corsair recommends removing both side panels and setting
them aside when building your system to avoid accidental damages.

Corsair 750D Specifications

General

Type	Full Tower
Material	Steel, Plastic
Expansion Slots	9
Weight	9.7 kg
Maximum GPU Length	450mm
Maximum CPU Cooler Height	170mm
Maximum PSU Length	225mm
Motherboard Support	E-ATX, ATX, Micro-ATX, Mini-ITX
Dimensions	560mm x 546mm
Drive Bays	3 x 5.25"
Cooling Support	Front: 2 x 140mm or 3 x 120mm, Top: 3 x 120mm or 2 x 140mm, Rear: 1 x 140mm or 120mm, Bottom: 2 x 120mm
Included Fans	Front: 2 x 140mm, Rear: 1 x 140mm
Radiator Support	Top: 120/240/280/360mm; Rear: 120/140mm
Front I/O Ports	2 x USB 3.0, Audio in/out