To Next PageTo Next Page
Need help?Do you have a question about the Corsair 780T and is the answer not in the manual?
General| Form Factor | Full Tower |
|---|---|
| Front I/O Ports | 2 x USB 3.0, 2 x USB 2.0, 1 x Headphone, 1 x Microphone |
| Expansion Slots | 9 |
| Maximum GPU Length | 355mm |
| Maximum CPU Cooler Height | 200mm |
| Maximum PSU Length | 260mm |
| Color | Black, White |
| Material | Steel, Plastic |
| Motherboard Support | Mini-ITX, MicroATX, ATX, E-ATX |
| Cooling Support | Front: 2 x 140mm/120mm, Top: 3 x 120mm or 2 x 140mm, Rear: 1 x 140mm/120mm |
| Radiator Support | Front: Up to 360mm, Top: Up to 360mm, Rear: Up to 140mm |
| Included Fans | Front: 2 x 140mm, Rear: 1 x 140mm |
| Drive Bays | x6 3.5in, x4 2.5in |
Details the length, width, height, and weight of the PC case.
Specifies maximum GPU length, CPU cooler height, and PSU length.
Lists and illustrates the various screws, ties, and standoffs included in the accessory kit.
Highlights notable features like fan mounts, I/O panel, dust filters, drive bays, and tool-less design.
Instructions on how to release and remove the side panels of the case for access.
Guide for installing the I/O shield and securing the motherboard to the case standoffs.
Steps for positioning and securing the power supply unit (PSU) at the bottom of the case.
Procedure for installing expansion cards into the available slots.
Instructions for installing optical drives (ODD) into the 5.25" bays using the tool-less latch.
Guide for installing 2.5" SSDs into the tool-free expandable SSD cages.
Details on connecting fan power and utilizing the fan speed selector.
Guidance on connecting front panel headers like USB 3.0, USB 2.0, and audio to the motherboard.
Steps for removing the front fascia and securing screws to detach the I/O panel.
Clarification on polarity requirements for I/O panel connectors, noting only LED headers are polarity sensitive.
Information on contacting support for damaged or malfunctioning components, referencing RMA process.
Table detailing fan sizes and locations for front, top, rear, and bottom mounts.
Instructions on how to remove the front panel by pushing the top corners of the plastic cover.
Procedure for removing the bottom dust filter by locating and pulling the tab underneath the PSU.
Guide on removing drive cages via screws and notes on their stackability and removal for cooling.
