To Next PageTo Next Page
Need help?Do you have a question about the Corsair AX1600i and is the answer not in the manual?
General| Purpose | PC |
|---|---|
| ATX version | 2.4 |
| EPS version | 2.92 |
| Noise level | - dB |
| Bearing technology | FDB |
| 80 PLUS certification | 80 PLUS Titanium |
| Mean time between failures (MTBF) | 100000 h |
| Continuous output rated temperature | 50 °C |
| Power supply unit (PSU) form factor | ATX |
| Efficiency | 94 % |
| Total power | 1600 W |
| Input current | 9 - 15 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Combined power (+5V) | 180 W |
| Combined power (-12V) | 9.6 W |
| Combined power (+5Vsb) | 17.5 W |
| Max output current (+5V) | 30 A |
| Max output current (+12V) | 133.3 A |
| Max output current (-12V) | 0.8 A |
| Power protection features | Over current |
| Max output current (+5Vsb) | 3.5 A |
| Cooling type | Active |
| Fan diameter | 140 mm |
| On/off switch | Yes |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Cabling type | Fully-Modular |
| Motherboard power connector | - |
| Number of SATA power connectors | 5 |
| Peripheral (Molex) power connectors (4-pin) | 3 |
| Harmonized System (HS) code | 84733020 |
Weight and Dimensions| Depth | 150 mm |
|---|---|
| Width | 200 mm |
| Height | 86 mm |
| Weight | 2650 g |
Shuts down the PSU if DC output voltages exceed specified safe levels.
Maintains DC voltage rail outputs within safe limits, configurable for rail setup.
Shuts down the PSU when internal temperatures reach a critical point.
Prevents damage by shutting down the PSU in case of short circuits on output rails.
Shuts down the PSU if DC output voltages fall below specified safe levels.
Shuts down the PSU when power demands exceed its rated capability.
Covers installation, handling, environment, and cable usage safety guidelines.
