EasyManua.ls Logo

Corsair CX650F - Introduction; Safety and Protection; Over-Voltage Protection (OVP); Over-Current Protection (OCP)

Corsair CX650F
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 2
ENGLISH ENGLISH
TABLE OF CONTENTS
SAFETY AND PROTECTION
INTRODUCTION
CX750F RGB .............................................................................................................................................................3
CX650F RGB .............................................................................................................................................................5
CX550F RGB .............................................................................................................................................................7
Installation .................................................................................................................................................................9
RGB setup and control ............................................................................................................................................ 10
Congratulations on the purchase of your new CORSAIR CX-F RGB Series ATX Power Supply!
CORSAIR CX-F RGB Series fully modular power supplies deliver reliable 80 PLUS Bronze efficient power to your
system, alongside vibrant customizable lighting from a 120mm RGB fan boasting eight RGB LEDs. Easily cycle
through seven preset lighting modes, or connect to a CORSAIR iCUE RGB Lighting Controller or compatible
motherboard to unlock advanced lighting control over eight individually addressable LEDs.
> Over-voltage protection (OVP)
Over-voltage protection for the 12V, 5V, and 3.3V DC outputs is required to comply with the ATX
specification. OVP shuts down the PSU in the event that the DC outputs exceed a set level,
determined by the PSU manufacturer.
> Over-current protection (OCP)
The CX-F RGB Series features OCP on the 3.3V, 5V, and 12V rails. OCP ensures that the output of the
DC voltage rails remains within safe operating limits.
> Over-temperature protection (OTP)
OTP ensures that the PSU will shut down when the internal temperature reaches a set point. This is
usually as a result of internal current overloading or a fan failure.
> Short-circuit protection (SCP)
A short-circuit is defined as any output impedance of less than 0.1 ohms. Amongst other things, SCP
ensures that the PSU shuts down should the 3.3V, 5V, and 12V rails short to any other rail, or to
ground. It also ensures that no damage should occur to the unit, or your PC’s components in the
event of a short.

Related product manuals