ENGLISH
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Hyper-fast sub-1ms wireless connection is designed for no-compromise gaming
grade performance.
> Toggle power / wireless mode switch (S) to "2.4GHz" position to turn on your mouse.
> Connect the USB wireless receiver (V) to an available USB 2.0 or 3.x port located on the front
panel of your PC or nearby USB port.
(e.g. on CORSAIR MM700, MM800, MM1000 mousepads).
> The battery & wireless LED indicator (C) will turn solid white when connected.
> Download the iCUE software from www.corsair.com/downloads.
> Run the installer program and follow instructions for installation.
If reconnection is required, initiate USB wireless receiver pairing via the iCUE software settings menu.
SETTING UP BLUETOOTH
®
WIRELESS
Bluetooth wireless is best for everyday computing tasks, productivity, and ofce applications.
> Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
> Press and hold DPI UP button.
> Toggle power / wireless mode switch (S) to "BT" position to turn on your mouse.
> Follow the instructions to successfully connect your device.
> The battery & wireless LED indicator (C) will turn solid blue when connected.
ON-THE-FLY DPI TUNING
The mouse has a unique feature where you can adjust the current onboard DPI stage setting in 50 DPI increments
without the software, so you can jump right into the action while you nd the perfect sensitivity setting.
On-the-y DPI changes are saved to the onboard memory and can be further adjusted in granular 1 DPI steps in
iCUE software. If iCUE is running, then changes are saved to the software prole directly.
FUNCTION SHORTCUT MULTI-PURPOSE LED INDICATOR
Increase DPI by 50
Hold DPI up button (H) and press
forward button (L)
Blinks green
Decrease DPI by 50
Hold DPI up button (H) and press
back button (M)
Blinks red
Reset DPI Stage
Hold DPI up (H) then both forward (L)
and back (M) buttons for 2 seconds
Blinks yellow
ENGLISH
2
To Next Page
Loading...
Need help?
General