EasyManua.ls Logo

Corsair HX1000i - User Manual

Corsair HX1000i
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
POWER SUPPLY
MANUAL
HIGH PERFORMANCE ATX POWER SUPPLY
ENGLISH
EN
FRANÇAIS
FR
DEUTSCH
DE
ITALIANO
IT
ESPAÑOL
ES
PORTUGUÊS
PT
POLSKI
PL
Question and Answer IconNeed help?

Do you have a question about the Corsair HX1000i and is the answer not in the manual?

Summary

Safety and Protection Features

Over-Voltage Protection (OVP)

Protects against excessive DC output voltage levels, ensuring system stability and compliance with ATX specifications.

Over-Current Protection (OCP)

Monitors and limits current flow on specific voltage rails (3.3V, 5V, 12V) to prevent damage from overloads.

Over-Temperature Protection (OTP)

Shuts down the PSU when internal temperatures exceed safe operating limits, preventing thermal damage.

Short-Circuit Protection (SCP)

Detects and prevents damage from short circuits on output rails, maintaining unit and component integrity.

Over Power Protection (OPP)

Activates when power draw exceeds rated capacity by 115%-135%, safeguarding the PSU from overload.

Catastrophic Failure Protection

Initiates a safe shutdown to prevent damage and hazards from severe PSU malfunctions.

HX1000 i Hardware and Specifications

HX1500 i Hardware and Specifications

HXi Series Cable Information

HXi Series Power Supply Installation

Removing Your Existing PSU

Steps for safely disconnecting and uninstalling the previous power supply unit from the system.

Installing the New Power Supply

Instructions for connecting the new PSU, including ATX, EPS, PCI-Express, and SATA cables.

CORSAIR iCUE Software

Corsair HX1000i Specifications

General IconGeneral
Efficiency92 %
Total power1000 W
Input current6.5 - 13 A
AC input voltage100 - 240 V
AC input frequency47 - 63 Hz
Combined power (-12V)9.6 W
Combined power (+3.3V)150 W
Combined power (+5Vsb)15 W
Max output current (+12V)83.3 A
Max output current (-12V)0.8 A
Power protection featuresOver power, Over voltage, Overheating, Short circuit, Under voltage
Max output current (+3.3V)25 A
Max output current (+5Vsb)3 A
Maximum input current (@110V)+12V, +3.3V, +5V, +5Vsb, -12V A
Cooling typeActive
Fan diameter140 mm
Fan locationTop
On/off switchYes
Product colorBlack
Number of fans1 fan(s)
Cabling typeFully-Modular
Motherboard power connector20+4 pin ATX
Floppy drive power connector2
Number of SATA power connectors12
PCI Express power connectors (6+2 pin)8
PurposePC
ATX version2.4
EPS version2.92
Noise level- dB
CertificationFCC, ICES, CE, UL/CUL, CSA, C-Tick/RCM, TUV, CB, CU, KC Mark, WEEE, REACH
80 PLUS certification80 PLUS Platinum
Power supply unit (PSU) form factorATX
Sustainability certificatesRoHS
Package typeBox
Package depth392 mm
Package width225 mm
Package height152 mm
Package weight4211 g
Weight and Dimensions IconWeight and Dimensions
Width- mm
Weight3592 g

Related product manuals