To Next PageTo Next Page
Need help?Do you have a question about the Corsair HX850i and is the answer not in the manual?
General| Efficiency | 92 % |
|---|---|
| Total power | 850 W |
| Input current | 6 - 12 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 47 - 63 Hz |
| Combined power (-12V) | 9.6 W |
| Combined power (+3.3V) | 150 W |
| Combined power (+5Vsb) | 15 W |
| Max output current (+12V) | 70.8 A |
| Max output current (-12V) | 0.8 A |
| Power protection features | Over power, Over voltage, Overheating, Short circuit, Under voltage |
| Max output current (+3.3V) | 25 A |
| Max output current (+5Vsb) | 3 A |
| Maximum input current (@110V) | +12V, +3.3V, +5V, +5Vsb, -12V A |
| Cooling type | Active |
| Fan diameter | 140 mm |
| Fan location | Top |
| On/off switch | Yes |
| Product color | Black |
| Number of fans | 1 fan(s) |
| Cabling type | Fully-Modular |
| Motherboard power connector | 20+4 pin ATX |
| Floppy drive power connector | 2 |
| Number of SATA power connectors | 12 |
| PCI Express power connectors (6+2 pin) | 6 |
| Purpose | PC |
| ATX version | 2.4 |
| EPS version | 2.92 |
| Noise level | - dB |
| Certification | FCC, ICES, CE, UL/CUL, CSA, C-Tick/RCM, TUV, CB, CU, KC Mark, WEEE, REACH |
| 80 PLUS certification | 80 PLUS Platinum |
| Power supply unit (PSU) form factor | ATX |
| Sustainability certificates | RoHS |
| Package type | Box |
| Package depth | 392 mm |
| Package width | 225 mm |
| Package height | 152 mm |
| Package weight | 3922.5 g |
Weight and Dimensions| Width | - mm |
|---|---|
| Weight | 3374 g |
The HXi Series features 80 PLUS Platinum certification for high efficiency and quiet operation, with a fan that can stop at low loads.
Monitor PSU performance, switch modes, and control fan speed via a desktop application connected through USB.
Features fully modular cables for easy installation and a fan self-test switch to verify fan functionality.
Achieves high energy efficiency (up to 92%) through sophisticated design and advanced components for cooler, quieter operation.
Provides exceptionally stable power with tight DC output voltage regulation, minimal ripple/noise, and excellent transient response.
Utilizes synchronous rectification and individual DC-DC regulation for reduced ripple and noise.
Offers maximum flexibility and airflow by allowing users to connect only necessary cables, reducing clutter.
Allows validation of fan functionality before system installation via a dedicated self-test button.
Shuts down the PSU if DC output voltages exceed predefined safe levels to protect components.
Ensures DC voltage rails stay within safe operating limits, preventing damage from excessive current draw.
Shuts down the PSU if internal temperature exceeds a set threshold, usually due to overloading or fan failure.
Prevents damage to the PSU and system components by shutting down the unit in case of a short circuit.
Instructions for safely uninstalling the old power supply before installing the new one.
Detailed steps for physically installing the new PSU, including motherboard connector guidance.
