ENGLISH
2
ENGLISH
ONBOARD LIGHTING
FACTORY RESET
Keyboard lighting effects can be controlled via the onboard shortcuts below when iCUE is not running or the
keyboard is connected to a device that does not support iCUE.
To clear the onboard memory, hold the ESC key while plugging in the USB cable (E) from the keyboard to your
system, then release the ESC key after two seconds. The keyboard will then power on normally and be reset to
factory defaults.
*Functions supported on select effects.
* Disables the Windows key to prevent accidental keypresses and can be
programmed in iCUE to also disable other contextual menu key presses.
FUNCTION SHORTCUTS
SHORTCUT FUNCTION
FN + F1
Toggle Win
Lock*
FN + F3
Decrease
Backlighting
Brightness
FN + F4
Increase
Backlighting
Brightness
SHORTCUT FUNCTION
FN + F9
Stop
Playback
FN + F10 Last Track
FN + F11 Play / Pause
FN + F12 Next Track
SHORTCUT FUNCTION
FN + F5 Mute
FN + F7
Decrease
Volume
FN + F8
Increase
Volume
SHORTCUT LIGHTING EFFECT
FN + 1 Spiral Rainbow
FN + 2 Rain
FN + 3 Rainbow Wave
FN + 4 Visor
FN + 5 Type Lighting (Per-key)
FN + 6 Type Lighting (Ripple)
FN + 7 Color Shift
FN + 8 Color Pulse
FN + 9 Color Wave
FN + 0
Static Color
(Press to cycle colors)
SHORTCUT FUNCTION
FN + ` Reset to onboard stored effect
FN + - Reduce effect speed*
FN + = Increase effect speed*
FN + [ Rotate effect left*
FN + ] Rotate effect right*
With iCUE you can program vivid
and dynamic custom multi-layered
lighting effects.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
