To Next PageTo Next Page
Need help?Do you have a question about the Corsair T1 RACE and is the answer not in the manual?
General| Seat type | Padded seat |
|---|---|
| Seat color | Black, Yellow |
| Product type | PC gaming chair |
| Backrest type | Padded backrest |
| Castor wheels | Yes |
| Seat material | Faux leather |
| Frame material | Metal |
| Number of wheels | 5 wheel(s) |
| Maximum user weight | 120 kg |
| Racing wheel/flight stand included | No |
Weight and Dimensions| Height (max) | - mm |
|---|
Insert chair wheels into the chair base by pressing the stud firmly into the hole on the bottom.
Install the gas lift and cover into the chair base, removing the protective cap for function.
Place the completed chair base assembly to the side.
Attach the seat control base to the seat cushion using the M8 allen key and provided screws.
Secure the chair back to the seat cushion using screws, starting with the recline mechanism side.
Place the assembled seat onto the chair base, ensuring the gas lift cylinder is firmly seated.
Snap the chair back covers into place over the attachment points between seat cushion and back.
Enjoy your new T1 RACE gaming chair after completing all assembly steps.
Install the neck pillow using its snap attachment in two ways for adjustable placement.
Route lumbar pillow straps through the seat and back, then snap them for height adjustment.
