Cosmo P 500 User Manual

2
6
8.1. LUBRICATION
Before every use and after every 8 hours of effective work, carry out the greasing of the machine.
It is a good use that the greasing nipples are well cleaned up from mud or other residuals before
using them for inject lubricating grease.
Lubricate with lithium grease the points, shown in the picture.
8.2. REPLACMENT OF DISTRIBUTOR VANES
In case the spreading vanes are broken or damaged, it is necessary to substitute them with new ones.
Unscrew the nut and replace the damaged vane.
The fixing items (nuts and bolts) must be the same type of those prescribed by the manufacturer.

Cosmo P 500 Specifications

General

Brand	Cosmo
Model	P 500
Category	Spreader
Language	English