Need help?Do you have a question about the Cosmo P 180 and is the answer not in the manual?
Overview of safety labels and their importance for operator safety.
Procedures for correctly assembling and setting up the machine with the tractor.
Specifies tractor requirements and procedures for 3-point hitch connection.
Detailed steps for connecting the spreader to the tractor's 3-point hitch.
Instructions for installing and using the PTO drive shaft safely.
Guidance on setting the spreader for optimal distribution based on material and conditions.
Instructions for adjusting spreader vanes for uniform distribution based on fertilizer type.
Procedure for greasing the machine before use and after 8 hours of work.
Instructions for replacing damaged or worn distributor vanes on the spreading disc.
Tables for adjusting spreading width and quantity with a standard limiter.
To Next Page
General
