Do you have a question about the COSMOGAS MYDENS and is the answer not in the manual?
Specifies national laws and standards for installation.
Precautions for storing flammable materials near the appliance.
Guidelines for proper installation and modification procedures.
Instructions for handling appliance breakdowns and repairs.
Defines the necessary qualifications for service technicians.
Explains the intended use and operational capabilities of the appliance.
Provides graphs showing head losses in the central heating system.
Details head losses in the domestic hot water circuit.
Specifies required clearances for installation and maintenance.
Factors to consider when selecting a suitable installation site.
Guidelines for connecting water supply and return pipes.
Specific requirements for low-temperature heating systems.
Guidelines for domestic hot and cold water connections.
Procedures and precautions for gas supply connection.
Step-by-step guide for physically mounting the boiler.
Instructions for installing and maintaining the condensate drain.
Information on the safety valve and its drain connection.
Details on making hydraulic and gas connections.
Steps for connecting to an indirect water heater (MYDENS B model).
General guidelines for electrical connections.
Procedure for connecting the main power supply cable.
Criteria for selecting a suitable room thermostat.
Steps for wiring the room thermostat or chronothermostat.
Instructions for installing an optional external temperature sensor.
Requirements for exhaust and air intake pipe systems.
General steps before starting appliance operation.
Steps to convert the appliance for different gas types.
Verifying and adjusting gas supply pressure.
Checking and adjusting combustion air pressure for correct ratio.
Measuring and adjusting CO2 levels for optimal combustion.
Setting the maximum heating power based on plant requirements.
List and description of parameters adjustable by technicians.
Importance and frequency of regular maintenance.