21
ameriwoodhome.com
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture p over.
To prevent p over:
* Install pover restraint provided
* place heaviest items in the lowest
drawers
* Unless specically designed to
accommodate, do not set TVs or
other heavy objects on the top of
this product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a me
Use of p over restraints may only
reduce, but not eliminate the risk
of p over
OPTION 1: Aachment into a wall stud (preferred method)
Using a stud nder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this locaon.
To make driving the screw easier, you can drill a 1/8” diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
ghened.
OPTION 2: Aachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16” diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole unl it is ush.
Move your unit into locaon and fasten the wall bracket to the wall anchor with the screw.
Tighten the screw that was not fully ghtened.
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
aach the safety bracket.
hole
stud
wallboard
x1 set
TUD0021
13
1
To Next Page
Loading...
Need help?
General
