To Next PageTo Next Page
Need help?Do you have a question about the Cosmos XP-3110 and is the answer not in the manual?
General| Brand | Cosmos |
|---|---|
| Model | XP-3110 |
| Category | Security Sensors |
| Language | English |
Follow safety guidelines to prevent explosions when using the gas detector.
Defines DANGER, WARNING, CAUTION, and Note symbols used for safety.
Key safety instructions for operating the gas detector to prevent accidents.
Details the gas concentration display, units, battery level, peak hold, and alarm indicators.
Shows gas concentration, messages, and time. Confirms gas numbers for multiple gases.
Explains the functions of POWER, AIR ADJ., LIGHT, BZ.STOP, and MENU buttons.
Details the gas sampling hose, coupler, drain filter, and suction attachment pipe.
Describes the shoulder belt mounting bracket, sampling pipe holder, fastener, and back pocket.
Outlines the sequence: insert batteries, turn ON, detect, turn OFF.
Instructions for inserting the provided batteries into the gas detector.
Steps for powering on the detector, its warm-up process, and zero calibration.
Explains how to read gas concentration on the display and use the backlight.
How to check the gas number for multiple detectable gases using the BZ.STOP switch.
Instructions for conducting zero adjustment using the AIRADJ. switch.
How to change the bar graph range (AUTO, H, L) using the POWER switch.
Procedure for safely powering down the gas detector after use.
Explains how gas alarms are triggered, indicated, and how to silence the buzzer.
Lists configurable functions like Peak Hold, Buzzer Silence, and Time Settings.
Continues displaying the peak value of the detected gas concentration.
Mutes the alarm buzzer when the detected gas concentration reaches the alarm level.
Allows selection of detectable gases if two or more are present.
Allows setting the date, month, year, and time on the detector.
Logs detected gas concentration and date. Requires PC and Log Data Collection Set.
Reads logged data from the detector using a PC and collection set.
Step-by-step guide to enable or disable the peak hold function.
Steps to mute the alarm buzzer when gas concentration reaches the alarm level.
How to select the type of sample gas when multiple gases are detectable.
Procedure to start logging gas concentration and data for later analysis.
Steps to connect to a PC and read logged data from the detector.
Detailed steps to set year, month, date, hour, and minute.
Instructions for cleaning and replacing the filter element in the drain filter.
Steps for replacing the AA alkaline batteries, ensuring correct polarity and security.
Covers checks for gas sampling hose, drain filter, battery level, and airtightness.
Recommendation to request periodic accuracy checks from the manufacturer.
Lists key replaceable parts like the Filter Element (FE-2).
Instructions on how to request periodical checks and repairs from New-Cosmos Electric.
Details the product model, serial number, date, and rating information.
Shows the maximum allowable voltage (Um) for the USB port.
Explains the warning for zipping the detector inside the case in hazardous locations.
Details warnings for safe operation and user manual reference.
Lists relevant UL, EN, and IEC standards for hazardous locations.
Explains how catalytic combustion detects combustible gases via resistance changes.
Describes semiconductor detection of combustible gases based on electron concentration.
Details detection based on thermal conductivity differences between gases.
