Cosmos XP-3160 - User Manual

Portable Gas Detector
Instruction Manual
This instruction manual explains to the use of three models listed on the left
● Please keep this instruction manual available for quick reference when
needed
● Before use, carefully read this instruction manual and fully understand the
content.
■ XP-3110
(Combustible gases and vapors detector)
■ XP-3140
(High concentration gas detector)
■ XP-3160
Specifications No.: XP-3000T

Summary

Introduction to Portable Gas Detector

Explosion-Proof Precautions

Essential safety guidelines to prevent ignition in hazardous environments.

Safety Symbols Explained

Defines warning symbols used throughout the manual for safety purposes.

Safe Operation Guidelines

Operating Procedures

Standard Operating Procedure Steps

Outlines the basic steps for operating the gas detector from startup to shutdown.

Gas Detection and Measurement

Explains how to view gas concentrations and perform sample gas checks.

Zero Adjustment and Range Settings

Details the procedures for zero calibration and adjusting the measurement range.

Power Management and Gas Alarms

Covers turning the device ON/OFF and how gas alarms are indicated.

Error Messages and Malfunctions

Understanding Error Codes and Remedies

Explains common error messages displayed on the LCD and their corresponding remedies.

Maintenance and Consumable Parts

Filter Element Replacement Procedure

Procedure for cleaning and replacing the filter element in the drain filter.

Battery Replacement Procedure

Step-by-step instructions for replacing the device's AA alkaline batteries.

Troubleshooting Common Issues

Problem Diagnosis and Solutions Guide

A guide to diagnosing and resolving common operational problems with the gas detector.

Technical Specifications

Gas Detector Model Specifications

Cosmos XP-3160 Specifications

General

Brand	Cosmos
Model	XP-3160
Category	Security Sensors
Language	English