Why won't my Cosmos XP-702III-B(S) turn on?
If your Cosmos Gas Detector isn't turning on after pressing the power button, it might be due to reversed battery polarity. Ensure you insert the batteries correctly. Alternatively, the batteries might be exhausted, so try replacing them with fresh ones.
What to do if the buzzer doesn't sound on Cosmos XP-702III-B(S)?
If the buzzer on your Cosmos Gas Detector isn't sounding, it could be because the device is in silent mode. Try releasing silent mode. Another possibility is that the alarm buzzer is turned off; in this case, turn it back on.
General| Model | XP-702III-B(S) |
|---|---|
| Type | Portable Gas Detector |
| Sampling Method | Diffusion |
| Detection Principle | Catalytic combustion type |
| Alarm Method | Buzzer, lamp flashing |
| Operating Temperature | -20°C to 50°C |
Safety guidelines for using the device in potentially explosive environments.
Explanation of warning and informational symbols used in the manual.
Crucial instructions for safe and proper use of the Gas Leak Detector.
Detailed description of each part and its function, including the LCD display.
Details on the side zipper, back pocket, and inside pocket of the soft case.
Instructions for inserting batteries into the Gas Leak Detector.
Steps for turning on the device, sensor warm-up, and sensitivity indication.
Ensuring the correct target gas is set before starting detection.
How to decrease and increase the gas sensitivity levels for optimal detection.
Understanding and responding to alarm buzzers and indicator lights during detection.
How the device enters automatic gas exhaust mode after power off.
Procedure for leaving the device in clean air after sampling high gas concentrations.
How to change the target gas for two-gas model devices.
Enabling and disabling silent mode to suppress operational sounds.
Instructions for turning the gas detection alarm buzzer ON or OFF.
How the LCD backlight operates and how to manage it for battery life.
Step-by-step guide for replacing the filter element in the Gas Leak Detector.
Procedure for replacing the FE-106 dust filter to prevent dust ingress.
Instructions for safely replacing the AA alkaline batteries.
Routine checks to perform daily to ensure proper function and safety.
Recommendation for annual professional inspection to maintain accuracy.
To Next Page
