Costar CR1600ET - User Manual

Questions and Answers

S
Sharon CombsAug 2, 2025
What to do if my Costar CR1600ET DVR has stopped recording?
- J
  Jennifer SmithAug 2, 2025
  If your Costar DVR has stopped recording, it might be because the hard disk drive is full. To resolve this, you can either delete existing video files or set the DVR to Overwrite Mode, which will automatically record over older footage.
V
vcookAug 8, 2025
How to fix Costar DVR no live video?
- K
  Kelly KempAug 8, 2025
  If you're experiencing no live video on your Costar DVR, there are several things you can check: * Verify the camera video cable and its connections. * Check the monitor video cable and connections. * Confirm that the camera is receiving power. * Review the camera lens settings. * Check the current main monitor resolution.
K
Kathleen FisherAug 14, 2025
Why does my Costar CR1600ET keep rebooting during system upgrade?
- J
  Jessica DuffyAug 14, 2025
  If your Costar DVR keeps rebooting and the upgrade fails, it could be because the current system version is higher than the upgrade package file version. To fix this, you should perform a Factory Reset on the DVR. Keep in mind that doing so will erase any saved settings.
E
Emily MillerAug 20, 2025
What to do if my Costar CR1600ET has no power?
- K
  Kristin EnglishAug 20, 2025
  If your Costar DVR has no power, check the power cord connections to ensure they are secure. Also, confirm that the power outlet is providing power.
S
smithbrandonAug 27, 2025
What to do if the icon displays but the Costar DVR is not recording?
- S
  Sheri JacksonAug 27, 2025
  If the icon displays but your Costar DVR isn't recording, it might be in Pre-Event recording mode. In this mode, the yellow icon displays when there is no event, indicating that the DVR is not actively recording. The red icon will display when an event occurs, and the DVR starts recording.