What to do if there is an unusual noise from the Costcare B120C Indoor Furnishing actuator?
If you hear an unusual noise from the actuator of your Costcare Indoor Furnishing bed, it might be because the actuator is worn, damaged, or the spindle is bent. The suggested solution is to replace the actuator. You may need to contact your supplier for assistance.
How to troubleshoot a Costcare B120C Indoor Furnishing bed that is idle when pressing hand pendant buttons?
If the Costcare Indoor Furnishing bed is idle when you press the hand pendant buttons, check these possible causes and solutions: * Ensure the power cord is properly connected to both the electrical socket and the bed. * Make sure all connectors are tightly connected to the control box. * Confirm that the load weight is within the bed's designated capacity; if it exceeds the limit, reduce the load. * Check if other buttons are working.
How to fix noisy casters/brakes on Costcare Indoor Furnishing?
If the casters or brakes of your Costcare Indoor Furnishing bed are noisy or stiff, it could be due to debris or fluff in the bearings. Clean or replace the casters to fix this issue.
General| Brand | Costcare |
|---|---|
| Model | B120C |
| Category | Indoor Furnishing |
| Language | English |
To Next Page