This document describes a Party Tent / Tente de fête / Carpa de fiesta, identified by ITM./ART. 1620000 and MODEL/MODÈLE/MODELO A110001700. It is a large outdoor structure, likely a gazebo or canopy, designed for temporary outdoor use.
Function Description:
The party tent serves as a temporary outdoor shelter, providing shade and protection from the elements. It is designed for assembly and use by multiple adults, emphasizing safety during installation and operation. The structure appears to be a multi-bay design, suggesting a significant covered area suitable for gatherings or events.
Important Technical Specifications:
The manual does not explicitly list detailed technical specifications such as dimensions, weight, or material composition beyond general descriptions. However, it does provide a parts list and hardware pack details, which indirectly indicate some material aspects:
- Parts List: Includes various structural components labeled A through L, with part numbers (e.g., P00020076601, P00010050601) and quantities (e.g., 10, 6, 12). These parts likely represent poles, connectors, and possibly decorative or functional elements of the tent.
- Hardware Pack: Specifies fasteners and tools:
- H1: Bolt M6*75 (74 pieces, 4 spare)
- H2: Flat Washer M6 (74 pieces, 4 spare)
- H3: Nut M6 (74 pieces, 4 spare)
- HS: Stake Ø8*300 (20 pieces, 0 spare)
- HW1: Wrench M6 (1 piece, 0 spare)
- HW2: Allen Key M6 (1 piece, 0 spare)
The inclusion of stakes (HS) indicates that the tent is designed to be anchored to the ground for stability. The use of M6 bolts, washers, and nuts suggests a robust, bolted assembly for the frame. The fabric of the tent is described as flame-resistant but not inflammable, meaning it will burn if in continuous contact with an ignition source.
Usage Features:
- Assembly: Requires at least four adults for safe assembly due to its weight. It should never be assembled by a single person. Children and pets must be kept away from the assembly area.
- Location: Must be assembled on a hard, level, and firm surface. Avoid sandy, muddy, or loose soil where stakes may not provide sufficient anchorage. Maintain a minimum distance of 1.8 m (5.9 ft) from any obstructions like fences, garages, houses, overhanging branches, clotheslines, or electrical wires.
- Safety Precautions: Some parts may have sharp edges; basic safety precautions should always be followed during assembly and use to prevent injury and damage. All instructions must be read before assembly and use.
- Outdoor Use Only: Designed exclusively for outdoor use.
- Stability Check: Bolts and fasteners should be checked for tightness before first use and regularly thereafter, tightening as needed.
- Snow Removal: Excess snow must be removed from the roof. A plastic snow rake is recommended to remove snow and ice to prevent damage and debris accumulation.
- Wind Conditions: Avoid installing the gazebo in areas prone to strong winds to prevent structural damage.
- Adult Operation: All assembly and maintenance must be performed by adults only.
- Part Protection: During assembly, protect parts by placing them on a non-abrasive surface like a blanket or cardboard.
- Fire Safety: Keep all flames and heat sources away from the fabric canopy. The fabric is flame-resistant but will burn if continuously exposed to a flame. Applying abnormal substances to the fabric may compromise its fire-retardant properties.
Maintenance Features:
- Rust Prevention: Steel components are treated with rust-inhibiting paint. However, surface oxidation (rusting) can occur if these protective coatings are scratched. This is not considered a defect and is not covered by the warranty.
- Scratch Repair: To minimize rusting, care should be taken during assembly and handling to avoid scratching the paint. Any scratches or damage should be immediately covered with rust-inhibiting paint (not included).
- Rust Removal: Surface rust can be easily removed with a light application of ordinary cooking oil or WD-40. If oxidation is not addressed, it may drip onto decks or patios, causing stains that are difficult to remove.
- Cleaning: Do not use bleach, acid, or other abrasive cleaners on the roof or structural parts.
- Instruction Manual: Keep the instruction manual for future reference.
- Bolt Tightness: Periodically check and ensure all bolts are tightly secured during use.
The product comes with a two-year limited warranty covering defects in material and workmanship for personal, residential purposes. The item must be maintained with care and used only for its intended purpose. If a defect is found, customers should contact the customer service department at 1-866-578-0101 or email costco@sunjoygroup.com for help. The manufacturer is not responsible for transportation or delivery costs or compensating individuals or third parties for assembly or disassembly.
Australia Specific Warranty:
Australian consumers are entitled to guarantees that cannot be excluded under Australian Consumer Law. They have the right to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. They are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Before returning to the retailer, customers are advised to send an email to costco@sunjoygroup.com or visit www.sunjoyonline.com for more information and quicker assistance. For phone inquiries, contact Sunjoy Group at 1(866) 578-0101 (English only) 24 hours a day, 7 days a week.
To Next Page
Need help?
General