Costco Adore Li User Manual

This is not a substitution for reading your Owner’s Manual. For more In depth instructions,
please refer to your Owner’s Manual.
Adore
™
Li
Quick Start Guide
RX 18815 Rev. 8/2018 PN 10240643 1.0
Consult your Hearing Care Professional if you have further problems.
Troubleshooting
Problem & Possible Solutions
Sound is weak:
Hearing aid does not work:
Hearing aid emits whistling sounds:
Sound is distorted:
Hearing instrument emits spontaneous signal tones:
Increase the volume
Recharge the hearing aid
Clean or exchange the click dome or wax protector
Turn the hearing aid on
Recharge the hearing aid
Power-on-delay is active. Wait several seconds and check again
Clean or exchange the click dome or wax protector
Reinsert the receiver until it fits securely
Decrease the volume
Clean or exchange the click dome or wax protector
Decrease the volume
Recharge the hearing aid
Clean or exchange the click dome or wax protector
Recharge the hearing aid

Costco Adore Li Specifications

General

Brand	Costco
Model	Adore Li
Category	Hearing Aid
Language	English

Summary

Troubleshooting Hearing Aid Issues

Sound is Weak

Solutions for weak sound output, including volume adjustment and cleaning.

Whistling Sounds

Steps to resolve whistling or feedback issues, like reinserting the receiver or cleaning.

Distorted Sound

How to fix distorted audio output by adjusting volume or cleaning components.

Spontaneous Signal Tones

Addressing unexpected signal tones from the hearing instrument by recharging.

Hearing Aid Not Working

Troubleshooting steps for a non-functional hearing aid, including power and charging.

Hearing Aid Charging and Operation

Check Charging Status

Guide to understanding LED indicators for hearing aid battery charge levels.

Turning Hearing Aids On

Information on automatic power-on, startup delay, and audible melodies.

Inserting Hearing Aids

Instructions for properly inserting the hearing aid receiver and fitting it securely.

Using Hearing Aid Controls

Details on adjusting volume, programs, and other features via pushbuttons.