Release the folding lock, pull the handle
bar backwards until you hear the "click”.
1. The front wheels must be turned in
the straight forward position, then push
the fixing lever upwards until the button
locks in place.
2. To release the wheels for free swivel,
push the fixing lever downwards.
To lock the rear wheel brakes.
1. Press both brake pedals down until
they “click” into the locked position.
Make sure the brake pedals are
pressed down completely.
2. Always set both brake pedals
whenever you park the stroller.
To unlock the rear wheel brakes. Lift
both brake pedals until they “click”
into the unlocked position.
The brakes must always be applied
when the stroller is not moving.
To attach the rear wheels, follow
this order
Install the wheel on the axle, and place
the workpiece part 1, part 2 and part 3
in sequence.
1. Slide front wheel brackets into front
legs until you hear a "click" sound.
2. To remove the front wheels, press
the small button and pull downwards.
folding lock
“Click”
Step 1 Unfold the stroller
Step 2 Front wheel assembly
Step 3 Rear wheel assembly
To lock the front wheels
Use the brake
UNLOCK
LOCK
Fixing lever Fixing lever
WARNING
06 07
To Next Page
Loading...